First print doesn't look too bad over all but, its got a wave it. Any ideas? I think the filament motor might be throbbing.sound rough when it prints but that could be the bearings not sure.by shaol - Prusa i3 and variants
Ok the only 2 things I change was end stop x from 1 to -1 (line 226) and second disable max end stop (line 249). Seems to be working and I mad a print of a 20x20x10 cube Actual size came out to 20.11x20.11x9.6-9.8. print sounds a little rough but, not sure if it the bearings. Also the print has a wave in it (see attack file). extruder not evenly flowing abs. I have tried in creasing extruder teby shaol - Prusa i3 and variants
@ Blank64 First I have no programming skill or 3d printing skill. I'm having problems too. which motor is it? Mine was X. If your are having the problem with the printer powered on then go into configuration.h go down to end stop and change 1 to -1 or the same as y and z. For me this freed the motor then it moved freely. goodluckby shaol - Prusa i3 and variants
ok will look into that thanksby shaol - Prusa i3 and variants
Does it matter when I entered the gcode that x,y, and z were homed and the end stops are at the home as well. should the end stop be at the min location or the max location? cause right now my end stop is at 0 (home) X,Y and Z.by shaol - Prusa i3 and variants
It said all min and max were trigerredby shaol - Prusa i3 and variants
Can't even get replies myself they took the money and ran. defective product you get a 50/50 chance of getting it to work.by shaol - Prusa i3 and variants
the motors work fine in X Y Z but when i go to slicer then print it doesn't move but it says printing. any ideasby shaol - Prusa i3 and variants
I don't have programming skills or electrical but I'm confident I put this Printer together correctly. First: what is or how do I use the m119. Second in manual mode using the computer (vista os) X and Y homing and movement works as its suppose to. Z home and movement works as it suppose to but goes all the way to the top (so I think that it doesn't stop).I tried shortening the height in prinby shaol - Prusa i3 and variants
The one I got from Folger tech should work with my kit but, It does not The problems I'm having is the x motor wasn't working I found that the end stop for x was 1 while the others were -1 so i change that. Not sure if i should change anything else. My heat bed doesnt stop heating (got so hot it broke my glass) its should stop at 70 but it went to almost 100. and last which is the most importaby shaol - Prusa i3 and variants
So it seem this file has bugs =. if anyone have a working printer with this file please attach file or the hole project will work too.by shaol - Prusa i3 and variants
FYI I updated firmware but not change.by shaol - Prusa i3 and variants
Well that didn't work =( still get the same error and my x motor still doesn't work any other ideas?by shaol - Prusa i3 and variants
Am I replacing Marlin_RAMPS_EPCOS_i38.ino (came from folger tech) with Merlin.inoby shaol - Prusa i3 and variants
in the files from folger tech I dont have this file. how do i get this file to there files. I dont program sorry for stupid questionsby shaol - Prusa i3 and variants
Am I suppose to copy paste the code into Arduino IDE? If so I'm I only doing "Configuration.h" or all? In the Merlin folder.by shaol - Prusa i3 and variants
Tring to get you all to help with my issue but email responce is slow. here is my problem. let em know what you think. So at this point I know the motor works and the step drivers are good. I also switch plugs so I know that isn't the issue. So I'm down to 2 possible problems one being program witch I don't think is the problem since this is not the first time folger tech made this printer.So thby shaol - Prusa i3 and variants
Yes I switch plugs, step drivers ( all 5 of them none changes out come) and even the motors with the same results. the motor works on Y and Z and any of them in X doesn't work. the x moves a quarter inch at a time until it hit the switch then it will not go back. So at this point I know the motor works and the step drivers are good. I also switch plugs so I know that isn't the issue. So I'm downby shaol - Prusa i3 and variants
Got a new Folger tech 3D print with all the head aches that comes with it.After about a mouth later and less then a week of working on it I'm still not up and running but very close. 'I think the issue is board related or program(more board) My X motor doesn't move using the manual controls in the Repetier host program and I get an line error of some sort no idea what it is. I have switch my X mby shaol - Prusa i3 and variants