I had to use a pair of plyers to pull the end of the belt up through the slot. but it did work in the end.by wmacm00 - Fisher
Fisher 1 SD image out, found the belt drive values where incorrect in the config.g, set to S1 instead of S0 for P0 to P2.by wmacm00 - Fisher
The Fisher1 SD image is now there to Download, which I have. had a look at the config.g, and it has the three belt drives as S1, so had the change them to S0. also M92 E is set to 310by wmacm00 - Fisher
Well that seems a lot better, thanks for the help DCby wmacm00 - Fisher
just had another look and found the other entry, M92 E137.0 changed to M92 E274.0 Thanksby wmacm00 - Fisher
dc42, will have another look at the config.g file. must have missed the other entry.by wmacm00 - Fisher
Matt, I had a similar issue, I have now soldered all the switch wires as well.by wmacm00 - Fisher
well 1st test print completed, but it looks like not feeding filament enough, so i tried changing M92 E value from 274 to 548, restarted Fisher, but it does not seem to move the filament any further that before. helpby wmacm00 - Fisher
Test print seems to have answered my question, Printing out Robot at this very moment...by wmacm00 - Fisher
looking at my config.g file, i have changed :- M569 P3 S0 to M569 P3 S1 looking at M92, there is no E entry M92 X87.489 Y87.489 Z87.489 ; Set axis steps/mm so would I change entry as below M92 X87.489 Y87.489 Z87.489 E274 ; Set axis steps/mmby wmacm00 - Fisher
Well, finish assembly of my Fisher 1, all went well, but has anyome worked out how the filament is supposed to route into the extruder drive, there is a small length of Bowden tubing supplied, but for the life on me i can't see an exit point in the frame, other that the slots in the lid. Also the mains lead supplied with my Power unit was NBG, luckly I had a spare clover left mains cable I couldby wmacm00 - Fisher
Well, got to the end of the photo's, extrider drive completed, have to wait to next update to carry onby wmacm00 - Fisher
just got my Ormerod 2 and am going to try 1.00e, but you quote web interface 1.04, where can i download that from sorry found it now, ignore me.....by wmacm00 - Ormerod