Hello thank for information yes I know it's not good and even if I change it in marlin when I upload marlin it does not change. moreover I encounter an issue when warming bed printer goes on error. I found power supply is or not enough power full or has an issue. I changed it and it seem to work better I will test anew and keep you informedby Dgils - Firmware - Marlin
Hello Hello everybody, I have a DELTA KOSSEL K800XL I change original board to a SKR1.3+TMC2226 (TMC2209) I use marlin 2.1.x I try to calibrate PIDTEMP and PIDTEMPBED. I use pronterface to do it : M503 to get ref of head and bed result M301, M304 respectivelly for head and bed M301 E0 S210 C8 to warm at 200 I get P I D value and I enter them with command M301 Pxx.xx Ixx.xx Dxx.xx update of tby Dgils - Firmware - Marlin
Hello all, visual studio - marlin I just received last version of PIO update Core 5.2.2·Home 3.3.4. since this upgrade I receive this error message : ERROR: Old files fell into your Marlin folder. Remove ultralcd_DOGM.cpp, ultralcd_DOGM.h and try again If I try to remove them I receive numerous message of error. I do not know where to find this 2 files up to date. And I do not understand whyby Dgils - Firmware - Marlin
Oki I just tested. Nothing changed. No move from motor. any new idea to make it work ?by Dgils - Controllers
thank you... at least I progress. Ok I activated it, but not tested for the moment not on site where the printer is. when compiling, I get this error message that is not blocking but is in warning : 'void print_es_state(bool, const char*)' defined but not used [-Wunused-function] is it because I have physical endstop and SPI mode do not use it ? if I understand good SPI mode use motor resustby Dgils - Controllers
Hello, I changed my 2560+ramp1.4+a4899 with a SKR1.3+TMC5160 I follow instruction from btt to make setup on SKR1.3+TMC5160 I use visual studio for diferent version of marlin 2.0 everytime I compile with success I succeed in transfert to board. here is issue I have : I can not make work motors. I made different test. try with different marlin. version originale V2.0.6x V2.0.9.1 V2.0.9.2 evenby Dgils - Controllers
oki will try thank for informationby Dgils - Administration, Announcements, Policy
Hello, i tried the search function. I search my pseudo, it's working I get all messages I posted I try to search SKR skr Skr skr 1.3 and did not get any result I try it from different browser same issue I try with some other word same issue i try directly in folder where I can see skr word same issue am I the only one to encounter this issue ?by Dgils - Administration, Announcements, Policy
Hello, sorry for the delay in answering... after a long time I did not touch printer because too demoralised with this printer I came back and found issue... I connected on the wrong port. E1 instead of E0.... so it's working now thank for your help. In the meantime I still can not print extruder is not enough strong to push pla. I need to turn screw on A4899 to put higher voltage but as i do nby Dgils - Printing
Hello, Sorry for the delay, For information, issue seem to connected with A4988 I need to turn small screw to put more voltage in motor. But i do not have ref of motor or did not find it to calculate voltage I need. In the meantime, I bought an SKR1.3 + TMC5160. I changed board. I have some new issues but anyway thx for your help with thisby Dgils - Delta Machines
Hello, I have an SKR1.3 + TMC5160 for a delta kossel. marlin is 2.0.9.1 in the menu I do not have in menu function to move x y z axes. this option are missing. when I try to make an home function few sec after printer goes on halt and I need to reset it. I would like to use pronterface with usb cable to use move function but proterface does not find any printer even if windows can see the memoryby Dgils - Firmware - Marlin
Hello, Did you solved issue ? I have same issue. even if windows can see the com5 and can access memory card on board, pronterface does not reconise my SKR 1.3.by Dgils - Controllers
Hello, I have an SKR 1.3 I have some problem of setup but I have not trouble with board itself. Mayby your power supply 24V is not good to much/not enough voltage, maybe parasite or noise on 24V signal ?by Dgils - Controllers
So I finally finish with setup of my delta. i have delta kossel K800xl + marlin 1.1.9.1 (last one) + alumimium bed I use cura 4.8 (last version up to date) distance between bed and nozzle is like a piece of paper thin. mean I tune z heigh correctly I tried to print a cube 10mm side : here are trouble I encounter when printing : -at the begining pla do not stick to bed. -I try to pass from 6by Dgils - Delta Machines
125 BAUDRATE 250000 most of the time 115200 is better, less trouble 547 DELTA_RADIUS 123 do you have a print area of 246mm diameter ? I have a kossel k800xl and mine is 280 mm diameter remove bed leveling linear delta use G33 for this.by Dgils - Delta Machines
there is no noise at all on the motor and I tried to cross/uncross cable on board connector : No change Maybe, if on the AT2560 I can manage a second extruder on another connector. maybe I can use this ? problem is I do not know how to change marlin to have extruder 2 as default and if I need to change driver position on the board ?by Dgils - Printing
Hello, thank for information, i have done as you said, but wanted to know why I encounter this issue. So now I will say it's solved. Problem is now I have extruder motor not turning. I open a new post for this. with all what I already done If you have good tips, like maybe inverting extruder 1 and 2 even if I do not have a second extruder...I takeby Dgils - Delta Machines
Hello, I have my extruder not turning at all. For information I test it with warming and without warming head. motor does not turn. Before it was making strange noise but not anymore and do not turn I tried : change cable change motor move extruder from pronterface move extruder from printer itself without success I have a delta kossel K800xl mega2560+at with unknown driver the less expensive Iby Dgils - Printing
oki, what I have done, is this : start with your marlin advise marlin1.1.9.1 use config+adv.h file modify them as they do not integrate the minimum of delta setting....(none of all marlin have config.h setup for a delta....) FOr info I try to dl config +adv h you provided me as a link, but there is no dl option, I need to copy them in a file and rename file. initialise eeprom G33 for delta calibrby Dgils - Delta Machines
I made an initialise eeprom now i have menu move on axes XY and move on Z plus some other option but still not calibrate axes Zby Dgils - Delta Machines
if I change the height in marling it's not taken in count when I upload marlin in printerby Dgils - Delta Machines
maybe someone with a delta kossel... maybe not a xl can send me config + config adv fileby Dgils - Delta Machines
Hello, yes they are triggered SENDING:M119 Reporting endstop status x_max: open y_max: TRIGGERED z_min: open z_max: open >>> m119 SENDING:M119 Reporting endstop status x_max: open y_max: open z_min: open z_max: open >>> m119 SENDING:M119 Reporting endstop status x_max: TRIGGERED y_max: open z_min: open z_max: open >>> m119 SENDING:M119 Reporting endstop status x_max:by Dgils - Delta Machines
for information if I use config .h of the one I create the topic, I have the menu calibrate ... but I also have issueby Dgils - Delta Machines
all are missingby Dgils - Delta Machines
it's enabled : // Enable DELTA kinematics and most of the default configuration for Deltas #define DELTA #if ENABLED(DELTA) // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 // Convert feedrates to aby Dgils - Delta Machines
i added 2650 in the name real name is : Marlin-bugfix-1.1.x ok I dl marlin 1.1.9.1 with your link. Problem in menu there is no more calibrate Z option after auto home...by Dgils - Delta Machines
oki, I took marlin 1.1.9.1 + config and config adv from kosell XL. grrrr, now the homing act strangelly. only 1 motor going down as it should goes up for homing....argby Dgils - Delta Machines
I just checked. it does not take count of it, it seem to go down always 16cm quickly first and slowly and printer rebootby Dgils - Delta Machines