Quotejaded Quotebartolomeus ok, that's the middle one in the 'triangle' right? edit: Ok, confirmed, it was the 'middle' one. I have it working now. Thanks for your help! Good to hear. It's best to find the stallguard threshold value that causes instant endstop trigger and then drop it by 5 to try to keep a reliable homing setup. Also, if you change your speeds in marlin (or from the lcd contrby bartolomeus - Firmware - Marlin
ok, that's the middle one in the 'triangle' right? edit: Ok, confirmed, it was the 'middle' one. I have it working now. Thanks for your help!by bartolomeus - Firmware - Marlin
Quotejaded Quotebartolomeus Hi, could you elaborate how you got sensorless homing working. Ik have the sgen-l with mks tmc2209 drivers. I compiled Marlin 2.0 firmware with senorless homing enabled, but I am not getting any movent on homing. I will take a stab at possible issues. Send M119 and check your endstop status before attempting homing. I'm guessing they will be TRIGGERED. If they arby bartolomeus - Firmware - Marlin
Quotejaded So to update anyone curious. Marlin 2.0 release on 1 Dec 2019. So far I have motor movement. I have sensorless homing working on the x and y axis. The y axis though seems hit or miss but the fact that others have stated they couldn't get it to work on this setup just makes me keep pushing. To reiterate: I am using the MKS SGEN-L 32 bit with the bundled MKS TMC2209 V1.0 drivers.by bartolomeus - Firmware - Marlin
QuoteJoergS5 I don't see problems with the C version, I think there are simply more H versions offered by the sellers, why they are used more often. I see more problems when you buy carriage and rails separately, as Hiwin and non-Hiwin have different rail profiles and the ball diameters are different also. I had my pitfalls.... Thanks. I already ordered some sets of rails with carriages (MGN12Cby bartolomeus - Extruded Aluminum Frames
I am building my own cartesian (235mm x 235mm x 235mm) printer for personal use. I designed some parts around MGN12C carriages because they are slighty more compact, but it seems everyone is using MGN12H carriages. Is there any reason not to use 12C carriages? Would I run into any problems with 12C carriages?by bartolomeus - Extruded Aluminum Frames