Thanks for the reply, I have done the following: 609 //#define Z_MIN_PROBE_ENDSTOP 588 #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //Enable this option for a probe connected to the Z Min endstop pin. (which is what I should have enabled, z end stop is currently plugged into this plug/pin) Left this as is (otherwise it will cause an error in SanityCheck.h) #define Z_MIN_PROBE_ENDSTOP_INVEby WolvenArrow - Firmware - Marlin
Hi there, Hardware: Tronxy P802EA with MKS Gen 1.4 board Firmware: Marin (1.1.x.zip … 1.1.8) I'm trying to work out what is wrong with the auto levelling feature G29. All of XYZ axis are moving in the right direction, calibrated ect Homing G28 works well Currently don't have a LCD screen setup because the "LCD 2004 5 button" display does not work with MKS Gen 1.4 from what i have researby WolvenArrow - Firmware - Marlin