Nic se neděje Tvoje konfigurační soubory jsou pro starší verzi než je současný Bugfix. Jakou používáš verzi FW Marlin ? Můžeš natočit video jak se tiskárna pohybuje ?by DrumClock - Firmware - Marlin
Není špatně nastavené servo42B od BTT které používáš na ose Y ? Menu "Direct pin" nastavení CW/CCW Já mám MKS servo42B ale asi to bude podobné.....by DrumClock - Firmware - Marlin
Hello, try this my test G-code for all IDEX modes.by DrumClock - Firmware - Marlin
Hi, Is it possible to set the speed (FEEDRATE) for changing tools T0 / T1 in IDEX mode?by DrumClock - Firmware - Marlin
Thank you, I have already completed the main development. Now it only wants to fine-tune the details like Nozzle-oozing, which worked on my version with one X carriages without any problems.by DrumClock - Firmware - Marlin
First tests of 4 extruders on IDEXby DrumClock - Firmware - Marlin
Hi @NovaHuta in the link provided, the standard configuration files are not modified for the StallGuard Z-MAX configuration.by DrumClock - Firmware - Marlin
Hi, is it possible to define a StallGuard function in Marlin for Z_MAX position detection instead of Endstop sensor? HW: I connected the ZDIAG pin of the TMC 2209 driver with the Z-MAX pin, but it doesn't do anything. Thanksby DrumClock - Firmware - Marlin
Hi, does anyone have experience using the I2C_POSITION_ENCODERS function? Can I use this encoder?by DrumClock - Firmware - Marlin
I have defined: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 ..... #define BED_MAXTEMP 150 Unfortunately, the temperature can only be set to: (via G-code or LCD) HEATER 260 BED 140 tested on current version bugfix 2.0.x (2020-12-24)by DrumClock - Firmware - Marlin
V podstatě potřebuji v Marlinu nastavit že T0 a T1 jsou na vozíku X1 a na vozíku X2 jsou T2 a T3. zde je V-extruder který používám: a zde: funkční verze bez IDEXby DrumClock - Firmware - Marlin
Zdravím, hledám programátora - nadšence, který by dokázal upravit FW Marlin Mám projekt na kterém pracuji - 4x extruder na IDEXu. Díky. Petrby DrumClock - Firmware - Marlin
Hi, Unfortunately, even if I use M109 or M190 in G-code, the PRINTER_EVENT_LEDS function is not active when printing from FTF SD.by DrumClock - Firmware - Marlin
the PRINTER_EVENT_LEDS function is active when printing with "onboard SD". If I print from TFT SD in the touch screen which is connected via RS232, then the NEOPIXEL LED does not work.by DrumClock - Firmware - Marlin
HI, I modified the program. #ifdef NEOPIXEL_BKGD_LED_INDEX if (NEOPIXEL_BKGD_LED_INDEX == nextLed) { if (++nextLed >= neo.pixels()) nextLed = 0; return; } #endif neo.set_brightness(incol.i); #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) isSequence = true; #endif if (isSequence) { neo.set_pixel_color(nextLed, neocolor); neo.show();by DrumClock - Firmware - Marlin
I have connected a LED strip WS2812B with 20 chips. Color switching with M150 is functional. But it doesn't work for me #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. Settings below. Where am I wrong? // Support for Adafruit Neopixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) #define NEOPIXEL_TYPby DrumClock - Firmware - Marlin
Very sorry. Everything is alright I had faulty Touch MI electronics. The above problem occurs when the HIGH level is permanently at the Z-probe output.by DrumClock - Firmware - Marlin
I use Touch-MI Probe by hotends.fr Is it possible to set a check that the probe is deploy ? If the probe is not unlocked at G28, the HotBed hits the nozzle. Configuration Z-probe: #define TOUCH_MI_PROBE #if ENABLED(TOUCH_MI_PROBE) #define TOUCH_MI_RETRACT_Z 1.0 // Height at which the probe retracts #define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the rigby DrumClock - Firmware - Marlin
FW Marlin: Bugfix 2.0.x Downloaded: 27.6.2020 at 15:17 (Prague) Dual X Carriage modes: 1. AUTO_PARK - OK - the movement of the carriage X1 is limited between -47 and 240 - the movement of the carriage X2 is limited between 0 and 292 - tool change T0 and T1 is exact according to offset X 2. DUPLICATION -by DrumClock - Firmware - Marlin
If the firmware doesn't work, I solved it mechanically.by DrumClock - Firmware - Marlin
Setting TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) solves the problem with POWER_LOSS_RECOVERY but not with DUAL_X_CARRIAGE. The TOUCH_MI_MANUAL_DEPLOY setting works but you cannot start remote printing using the Octoprint server. Thanks.by DrumClock - Firmware - Marlin
HI, I use a Z-probe type Touch-MI Probe by hotends.fr info: Touch-MI probe When using the POWER_LOSS_RECOVERY function, the probe is deployed when restored because the extruder moves to the X_MIN_POS position. This is inadmissible because the probe tip strikes the object when returning to the print position. The same problem occurs if DUAL_X_CARRIAGE mode is activated and carrier X1 is parkedby DrumClock - Firmware - Marlin
I updated bugfix 2.0.x and the problem is solvedby DrumClock - Firmware - Marlin
Hi, I'm trying to enable the POWER_LOSS_RECOVERY feature but it's not working well. After a power failure, pin 31 is activated by the HIGH value and printing is interrupted. These commands are not executed even if the UPS 24V power supply is still active: POWER_LOSS_ZRAISE 20 mm POWER_LOSS_RETRACT_LEN 10 mm After restarting the printer, the extruder moves to position X0, Y0,by DrumClock - Firmware - Marlin
Hi, Is it possible to check the status of the printer before NANO sends the "M25" command to the RUMBA board? It is unnecessary to send "M25" if it does not print from either the SD card or via Octoprin.by DrumClock - Firmware - Marlin
Thank you so much for your help, communication works.by DrumClock - Firmware - Marlin
HI, I enabled the function #define SERIAL_PORT_2 3 the NANO board transmits on the bus (RX LED flashes) but the RUMBA board does nothing. I'm sending the string "G28" from NANO, but the printer is not responding. Is it not necessary to set pins 14 and 15 as RX3 and TX3 in the Marlin configuration? BAUDRATE = 115200 is set on both boards. program for NANO board in the attachment.by DrumClock - Firmware - Marlin
HI, how do I set up serial communication in Marlin configuration ? Marlin Bugfix version 2.0.x. Arduino NANO digital pin 0,1 (RX,TX) to RUMBA digital pin 15,14 (RX3, TX3) Thanks.by DrumClock - Firmware - Marlin