Nice! Glad it was an easy fix. Thanks again for your help.by Lowtus7 - Firmware - Marlin
Im not doing the drag and drop method either. Im clicking 'Attach a file', select the file I want, then click attach. This is the message I get... 413 Request Entity Too Large As you can see from the photo linked in Google drive (of the neopixels) it is only 1Mb in size, that is the exact same photo I tried to link earlier. So I don't know what's going on. Tried a couple of browsers too, buby Lowtus7 - Firmware - Marlin
Success! What a legend, Thanks! It all boiled down too not having the ! in my code. I must have accidentally deleted it somehow and not noticed. The reason I had it set to GRB not RGB is because I had just been trying out everything I could think of, and that was just the last thing I had tried, I had it set to RGB previously, but as that was not working (due obviously to not having the '!' In tby Lowtus7 - Firmware - Marlin
I have included a link to google drive, with my whole configuration, if anyone is willing/able to have a look, it would be greatly appreciated. Also, does anyone have an idea why I cant attach anything in the forum? I have tried a couple of different browsers, but the same happens. It just shows a error (404 from memory) and says something like the entity is too large, no matter what size theby Lowtus7 - Firmware - Marlin
Here is a photo of the led strip. As I posted, it looks to me like the White element is clearly visible, in this case it is a warm white strip. It just doesnt make sense to me why my setup does not act the same as yours, ie the 'greyed out settings not acting the same. Hence why I think its a setup, programming issue. Im no expert on Marlin, by any means, but I am decent at working things out givby Lowtus7 - Firmware - Marlin
It did it again. You must not be able to post anything inside the triangle brackets... 'Includes' without the triangle brackets... "../../inc/MarlinConfig.h" Adafruit_NeoPixel.h stdint.hby Lowtus7 - Firmware - Marlin
Thats strange. When I post the 'Includes' portion, it looks fine before I post it, then it seems to remove some of the txt when I post it. I will just write it out: The 'Includes': "../../inc/MarlinConfig.h"by Lowtus7 - Firmware - Marlin
Sorry, I seemed to miss some of the text when I copied the includes, this is how it reads #ifndef _NEOPIXEL_INCLUDE_ #error "Always include 'leds.h' and not 'neopixel.h' directly." < (This line is greyed out) #endif // ------------------------ // Includes // ------------------------ #include "../../inc/MarlinConfig.h" #include #includeby Lowtus7 - Firmware - Marlin
This is what I have... I have included the 'Includes', are they correct?, I notice it mentioned including 'leds.h' not 'neopixel.h'. But mine seems to show 'Adafruit_neopixel.h'? #ifndef _NEOPIXEL_INCLUDE_ #error "Always include 'leds.h' and not 'neopixel.h' directly." #endif // ------------------------ // Includes // ------------------------ #include "../../inc/MarlinConfig.h" #includeby Lowtus7 - Firmware - Marlin
Thanks for your input. Just tried it on 5v, easy swap as the strip is powered from a ATX supply, so just a pin swap. Strip still functions as it was, so no worse! But I still only have control of the RGB elements, not the white.by Lowtus7 - Firmware - Marlin
Thanks for your help. But still no luck. Here are my settings as of now... From Config.h // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) #define NEOPIXEL_PIN PC4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPEby Lowtus7 - Firmware - Marlin
Hello, Im hoping someone can help me with my issue. I am trying to get my Neopixels set up, However, I am having an issue. (Bigtreetech Skr pro board) I have purchased a string of (SK6812) RGBW Neopixels. But I cant seem to get the White element going. I have had success in getting the RGB elements working correctly, However I cant seem to get the While pixels to go. What Im trying to achievby Lowtus7 - Firmware - Marlin
Thanks for your help. Haven't done that much on my machine over the last few days. Back into it today! Yes, success! I moved the endstops to the front of the machine, and everything is now working as expected. I have been teaching myself the workflow for a cnc, as I have only had previous experience working with 3d printers, and although similar, there are some differences, as Im sure you are awaby Lowtus7 - Firmware - Marlin
Update. After some investigation, I found I had sent you the wrong config. Silly me. I took your advice and downloaded Marlin 2.1, I tried to simply copy my Configuration.h and Adv Configuration.h files to the new Marlin directory, however, when trying to compile, it came up with a whole bunch of new errors. Including saying my Configuration.h and Adv Configuration.h were outdated, and somethingby Lowtus7 - Firmware - Marlin
Thanks for your replies, I really appreciate it. I have decided to just move the endstops to the front, and have it home there, hopefully that fixes my issue. I am wondering if I sent you the right config, Im sure I did? but I'm unsure now. My reason for saying that is the fact you say the config showed TMC2209 drivers specified, however, the config I am working with has the drivers listed as A49by Lowtus7 - Firmware - Marlin
Thanks for your interest in solving my issue. I have had many differing compile errors depending on what I tried. But this is the config where it all started, just changing the direction of homing for Y from -1 to 1 (line 1367 in Configuration.h). As stated in my post, I figured if I changed that, along with inverting the step direction (something I achieved by changing the dip switch position oby Lowtus7 - Firmware - Marlin
Another thing I have tried, is to assign the Y2 end stop from YMAX to the XMAX endstop (The only free endstop I have left) in configuration adv. h, Hopeing that would allow me to use the YMAX endstop for the Y endstop, but this wouldn't compile either.by Lowtus7 - Firmware - Marlin
Thanks for your reply, the bed is fixed, and the gantry moves over it. Endstops are positioned at the rear, and the gantry moves rearward towards the endstops when is homed. Endstops work like they should. But I feel like the machine thinks it is moving forward towards endstops located at the front. Hence why I needed to invert the control direction for Y in Repitier host. I feel the problem liesby Lowtus7 - Firmware - Marlin
Thanks for your reply. The Cnc isnt fully finished yet, so I wont be able to do a real test yet. I have just been using temporary wiring to test the individual axis one at a time, obviously having two sets of temporary wiring for the (2) Y axis. I figure the Y axis must be reversed as sending the command ie. : G91 (relative position) Y 50 Moves the Y axis towards the front (Away from the rear eby Lowtus7 - Firmware - Marlin
Looking for a expert opinion. I am making my first cnc, and working on the setup, however, I think I may have shot myself in the foot. My problem regards homing direction on the Y axis. I have the Z axis homing correctly, homing with the spindle raised to the top, using Repitier host manual controls, selecting Z up and down works perfectly. I have the X axis homing correctly, homing with the xby Lowtus7 - Firmware - Marlin