Oh. I actually manually extracted all the .gz inside the folders... so the firmware takes the files as-is?by Bob64 - Duet
That worked. We'll see if it bugs out next dwc update.by Bob64 - Duet
Running: 1.19 Firmware Name: RepRapFirmware for Duet Firmware Version: 1.19 (2017-08-14)by Bob64 - Duet
Any ideas or is it supposed to be one of those silent upgrades that never change the version number? Using a duet 0.8.5by Bob64 - Duet
Sounds like some sort of mechanical problem... check current voltage on your steppers, check to make sure your grub screws are tight, do some z tests by affixing a sticker or something on your z rod, and checking to make sure it goes to the same spot after a few dozen repeated turns up and down.by Bob64 - Duet
Extrude extra filament after pausing to prime the extruder. how about this: Print two test cubes. Pause one multiple times. The other you leave it alone. Does the final z height remain the same?by Bob64 - Duet
my bet is that the pressure in your hotend doesn't reach normal levels fast enough... so maybe look for the resume.g and add some extra feed on resume?by Bob64 - Duet
On one of my duets its running 12v, the other is 24v. Both have seen the issue so I don't think it is voltage dependant.by Bob64 - Duet
static ips.by Bob64 - Duet
I've noticed it with all versions of the firmware so far. Currently running 1.14.by Bob64 - Duet
Yes, MAC address is unique. Never modified the model.js file from the default settings. in the model.js file: webcamURL: "",by Bob64 - Duet
I have two duet boards. Both 0.8.5. I have noticed that occasionally that both of them randomly fails to completely start up or initialize the network chip enough to respond to pings. However, subsequent powercycling usually gets it working... Sometimes taking 2-4 power cycles to get it to respond to ping. Ip addresses are hardcoded in the sdcard. I'm using the stock sdcard on one and a larger sdby Bob64 - Duet
What file system / sector size are you guys using on your sd card?by Bob64 - Duet
Derp. Read the first two parts and skipped the entire section. Thanks.by Bob64 - Duet
Is it just me or does the duet not allow me to select temperatures higher then 250 from the dropdown after upgrading to 1.12a?by Bob64 - Duet