Firmware Repetier 1.0.3 With SMART RAMPSby cxandy - Controllers
1.ESP8266 WIFI control (work with ESP3D). 2.1.3"OLED DISPLAY. 3.MicroSD(TF) card slot. 4.buzzerby cxandy - Controllers
Install Instructions Download and prepare the Arduino IDE: 1.1 Install Arduino IDE version 1.6.8 from 1.2 Install the Arduino IDE 2. Open the Arduino IDE and click File, Preferences 2.1 In the "Additional Boards Manager URL field: Paste: 2.2 Click OK 2.3 Click Tools -> Boards -> Board Manager 2.4 Scroll to near the bottom, and find "esp8266 by ESP8266 Community) and click on theby cxandy - Controllers
What type of the probe? if powers off, maybe too much current.by cxandy - Controllers
Quotecxandy 1++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ D10 For heat1 D9 For heat2 D8 For bed Fan1 1 Fan - 2 Fan + this fan will always working. Fan2 3 Fan - 2 Fan + this fan can be controlled to on off and speed. 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ D10by cxandy - Controllers
1++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ D10 For heat1 D9 For heat2 D8 For bed Fan1 1 Fan - 2 Fan + this fan will always working. Fan2 3 Fan - 2 Fan + this fan can be controlled to on off and speed. 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ D10 For heat1by cxandy - Controllers
what version of your AZSMZ? 1.2 or 2.1?by cxandy - Controllers
Not uart0.baud_rate Is serial.baud_rate Thanks.by cxandy - Controllers
I don't modified firmware.it's just a new version smoothieware. Thanks.by cxandy - Controllers
Baud rate error, Thanks. # Serial communications configuration ( baud rate default to 9600 if undefined ) Serial.baud_rate 115200 # Baud rate for the default hardware serial portby cxandy - Controllers
Please see the video: Note:It's need new version smoothieware firmware.by cxandy - Controllers
Quoteangelo wer probiert das mal aus ? More hundred customers have worked very well.Thanks.by cxandy - Allgemeines
Please use a digital camera or mobile phone to format your TF card. After the AZSMZ is connected to the computer, don't connect the pronterface immediately, you must see the USB disk content in the compute, then you able to connect pronterface , otherwise it will appear the connection error. Thanks.by cxandy - Controllers
# NOTE Lines must not exceed 132 characters # Robot module configurations : general handling of movement G-codes and slicing into moves default_feed_rate 4000 # Default rate ( mm/minute ) for G1/G2/G3 moves default_seek_rate 4000 # Default rate ( mm/minute ) for G0 moves mm_per_arc_segment 0.5by cxandy - Controllers
AZSMZ Mini with smoothieware SMART RAMPS with repetierby cxandy - Controllers
SMART RAMPSby cxandy - RAMPS Electronics
SMART RAMPS is designed for due. In the design I also modified standard RAMPS 1.4 to work with Arduino Due. To facilitate debugging, the best also increased EEPROMby cxandy - RAMPS Electronics
Are you have AZSMZ 12864 LCD, and the ESP8266 need modified firmware.by cxandy - Controllers
Reprtier Host printer settings:by cxandy - Controllers
AZSMZ Mini + AZSMZ 12864 LCD + ESP8266by cxandy - Controllers
my sample config just for dual extruder. D10 heat1; D9 heat2; D8 bedheat; Fan can connected to heat together, can also be a separate power input.by cxandy - Controllers