Thanks a lot @dc42, . I found the mistake, I was obviously blind cause I did put a ":" instead of a "." in the y-coordinates of the second leadscrew.by gueee78 - Duet
I did that and obviously I did something wrong with Z leadscrew coordinates?! M584 output: Driver assignments: X0 Y1 Z2:4 E3:4, 3 axes visible M671 output: Z leadscrew coordinates are not configured but I don't know why, cause I did configure it in config.g here's the part of my config.g ; Drives M569 P0 S0 ; Drive 0 goes backwards M569 P1 S1by gueee78 - Duet
here's my console output: FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.02(RTOS) ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2018-12-24b1by gueee78 - Duet
I'm running the latest stable version 2.02 and wifi server version 1.22. should I update to the latest beta?by gueee78 - Duet
I just wonder how two points could or could not be in clockwise order? I'm kinda clueless at that point.by gueee78 - Duet
Hi again, I did a single G30 in the center of the bed in homez.g as well as homeall.g and homing works as expected. But I read the dual z-axis leveling (again) put it into the bed.g file for testing and it still gives me the same error no matter what order the two points are. now I'm stuck. again my homeall.g, homez.g and bed.g files. ; homeall.g ; called to home all axes ; ; generated by Reby gueee78 - Duet
I know you didn't mean mesh bed compensation. I just wonder if the dual z-axis leveling is part of the homing process or rather the bed leveling process, in other words is mesh bed compensation influenced by dual z-axis leveling?by gueee78 - Duet
Thanks @dc42, if I got you right, I could do a full mesh bed compensation afterwards and it would take the dual z-axis into account? Could you maybe provide an example for how the homez.g and the bed.g should look like? cheersby gueee78 - Duet
Hi, I recently upgraded my printer with a second z-axis stepper and a mini IR probe on duet 2 wifi. for some reason I'm not able to home z, it throws me an error. Error: Probe points P0 to P1 must be in clockwise order starting near minimum X and Y Error: Homing failed my first thought was I should change the order of the probe points, but it didn't help, still the same error. here is the paby gueee78 - Duet