Hi Guys, I have a common problem I think. I can tack plenty of pictures of parts goon bad, but have now answers. Should I post some images for you guys to tack a stab at?by gdwinslow - Printing
that was 48C with a big heat sink on them. Without the Heat Sink they hotbed one burns your fingers. But more importantly the Connecter for the 12V supply and the board, despite the fact I put ample amounts of solder, is burning. It is also burning the insulation from the power supply on the 12V lead. I could probably up the Voltage to 24V, but I am thinking I am at my max wattage through thaby gdwinslow - Next Wave Electronics Working Group
This is in regards to post 103, looks Good, but you relay do need a good Heat sink on Heater switches. They run a Lot cooler then the melzi board, but tack longer to Heat. and if you run the printer on large prints like 6 hour or more the heat starts to clime, and I have seen up to and above 48C with as big a Heat sink as I can put on them. We cant get mica Insulators hear any more so I needeby gdwinslow - Next Wave Electronics Working Group
Thanks I will give it a Tryby gdwinslow - Next Wave Electronics Working Group
Hi I have finished my GEN7 1.5 board and it passes all the pre test with test software. I have Ardunio 1.0.3, and installed the Gen7+Arduino+IDE+Support+2.1.zip into the hardware folder under the Ardunio folder. Got the Repetier-Firmware ver .82 and found the reference about the TEMP_2_PIN and HEATER_2_PIN. It compiles fine. Uploads fine, but when I try this command M500 in the Pronterface itby gdwinslow - Next Wave Electronics Working Group
The Kinect Fusion is bundled with the 1.7 SDK now. You should be able to Scan any Live object in 3D. The next step however is to find a Library to take that row Depth Data and convert it into and STL file. So it can be sliced and printed. I am familiar with the SDK and Depth Data, but now nothing about drafting file formats. Dos anyone know of such a Library, hopefully Open Source? or booksby gdwinslow - 3D Scanners, Book Scanners, and Optics
Is it possible to get this size rods: 428mm smooth 8mm rods (X) 350mm smooth 8mm rods (Z)by gdwinslow - For Sale
Hi Guys, I come from a History of messing with this Small Controllers using the Serial Interface for Downloading, Debugging and monitoring the Controllers program progress. Here is the Sequence I use to trouble shoot the problem: 1. Make Sure the Hardware and COM software on the PC Works as it should. a. This can mean hooking the USB or Serial connection (This Daye’s one and the Same) to anotherby gdwinslow - Experimental
I am building the Merlin firmware in the Atmel ID, mostly because I have a build system for that. But its coming out to big for the chip I have on my controller. Is there some space saving things I can do, like Microsoft has in the headers of there firmware (lean and mean) defines?by gdwinslow - Firmware - mainstream and related support