I'm updating Taurino/Ramps from 1.0.2 to 2.0 and experiencing problems with: 1) PLA fan pin 8 does not work even if i change pins_ramps.h 2) Pause does stop printhead but not moving to park position (park nozzle enabled) Can somone help me?by jzagaja - Firmware - Marlin
I'm about changing old Marlin 1.0.6 in 3DP1000 printer with Manta 8P/Klipper because orginal firmware lacks pause macro and filament sensor logic does not work. Have tried this: but it works only once then loops Here is original firmware: If somone has cfg file for Manta 8P with step/dir pins and LCD on exp1/2 let me know. I also need to convert steps/mm to rotation distance.by jzagaja - Stepper Motors, Servo Motors, DC Motors
I'm getting: 'setup_pausepin' was not declared in this scope why?by jzagaja - General
Printer manufacturers won't give you conf file. In this case what to do? I need turn on linear advance and: 1.- Set the steps/mm of the extruder between 900-600steps/mm. Initially recommended 800steps/mm. 2.- Set the thermistor NTC3950 (280ºC) or HT-NTC100K (350ºC); #define TEMP_SENSOR_0 5 #define DEFAULT_Kp 38.73 #define DEFAULT_Ki 2.72 #define DEFAULT_Kd 137.84 #define MANUAL_FEEDRATE {50*60by jzagaja - Firmware - Marlin
Feature request. I would like to print advanced laminates. Like this: two extruders printing defined outline/perimeter number so that we have: outline no 1: extruder 1 outline no 2: extruder 2 outline no 3: extruder 1 infill: extruder 1 or 2 outline no 4: extruder 1 outline no 5: extruder 2 outline no 6: extruder 1 This will allow constrained damping layer laminates.by jzagaja - Slic3r
Only option to use filament sensor is to buy TFT32?by jzagaja - Smoothie