I just added this part for using the Duet WiFi on the Hang Printer to Thingiverse: I still need to test print the parts. Enjoy Thank youby 3dprintgeek - Hangprinter
Tobben, That helps greatly. Have a great New Year. Thank youby 3dprintgeek - Hangprinter
Tobben, Thank you for that information. I watched the HP build videos. This is where the questions are coming from as I get ready to document things and create standards I hope will make it easier to understand the build. Below is a poorly constructed image of the anchors. This approximates the way things were laid out when you measured for the calibration. I was really unclear on what wasby 3dprintgeek - Hangprinter
David, Thank you for the opportunity. I will be happy to share my work here as I complete stages. Your help is appreciated Thank youby 3dprintgeek - Hangprinter
Tobben, Which is labeled correctly Fig.1 or Fig 2. in the following drawing? Thank youby 3dprintgeek - Hangprinter
I found this article describing braid vs fused - I'm still working on how to get Fireline in the US. Thank youby 3dprintgeek - Hangprinter
@dellman Thank you for that - how is your printer doing? I saw above it's moving. How have things progressed? Thank youby 3dprintgeek - Hangprinter
@Tobben, Thank you - I will be up soonish as I have what I think are the last parts coming Friday. I have all of my parts printed. I look forward to getting the printer in a useable state. The only hang up is the fireline. Here in the states we have much weaker variants of it, so i will probably start with .38 but hope to import from the UK or find something similar in the US. i suspect it'by 3dprintgeek - Hangprinter
David, I will be building and documenting the builds with stock ramps, and motors first, I will also do Silent step-sticks, and Mechaduinos later if they are still in stock when I'm ready. While providing some excellent features to the hang printer I feel they will for a while be the most exotic build. They require more electronics skill and knowledge than the other builds and the greatest cosby 3dprintgeek - Hangprinter
@dc42 I will be heavily documenting my build - If you want to lend or donate a controller I'd be glad to test it. I'm going to design a pre-done board layout and try to come up with a CNC pattern. I already have a slide in mount for stock Arduino / Ramps, so exchanging the electronics is 1 optional screw besides the terminals. I could do the same for the Duet WiFi. I also have a similar mounby 3dprintgeek - Hangprinter
Tobben, My CF tubes are 500 & 300mm. If I make the mover ( FH = Flying Head ), I will use this convention going forward, without cutting them down what changes? Understanding the board layout changes for the size difference. Is there any thing else I will need to do for a different size FH it will it be accounted for during the calibration? Also I have ordered the Silent Step Sticks I sby 3dprintgeek - Hangprinter
Hi All, I am located in Los Angeles. I'm going to be diving into a build soon. I'm trying to document and improve the build process. I have called the berkley filerline manufacture in the US. In converting the line used the .5 line is 110lbs test and it is not made or available in any way in the US. I'm reaching out to the UK and Germany to see about getting some and I will be talking to aby 3dprintgeek - Hangprinter
Dellman You can find the 15mm x 15mm square CF tube on Amazon too, but where I'm at it's twice as much as Hobby King.by 3dprintgeek - Hangprinter
I can't find Fireline in .5mm diameter in the US. I found this : .48mm and 80lbs break test? Will that work? Thank youby 3dprintgeek - Hangprinter