Ciao, ho letto tutto forum ora ed il tuo ultimo messaggio rispecchia quello che volevo dirti: per quanto la tecnica sia andata avanti e si riescano a fare cose eccezzionali, la tecnologia FDM ha i suoi limiti. Particolari molto piccoli o che richiedono una risoluzione molto elevata difficilmente si riescono ad ottenere (sicuramente non senza molta esperienza nel campo). E lo dico contro i miei inby DarioCorsetti - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Ciao, io vendo il kit completo della Prusa i2. Tutti i dettagli relativi alla macchina (ci sono tantissime varianti/possibilità e quindi abbiamo dato il nome RepRap#Resco al nostro cocktail e l'abbiamo documentato sulla wiki) li puoi trovare sulla pagina della wiki RepRapResco. Ovviamente non mi posso pronunciare su qualità del servizio/serietà per conflitto di interessi Se hai qualche dubbio/doby DarioCorsetti - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
Hi, I'm tripped up here searching for my company references (www.resco-research.com). Here my experience: we use a 5.08mm two poles connector rated for 15A without problems. A bit of care must be taken to assures that the connector is soldered on both sides of the pcb. In this way the current flow in the traces on both sides. I made some hundreds of print with this configuration, using a 0.8Ohmby DarioCorsetti - General
Sorry for the ridiculous late reply. Indeed, my favorite configuration is closed loop one. But as you wrote after the homing done at the begin of the print the firmware will avoid dangerous moves. The only problems can occours if your motors lose steps (and you can't avoid they anyway if don't use also a max endstop). However in the worst case when the axis will reach its limit the motor will loby DarioCorsetti - Controllers