Even with good calibrated readings any reference to temperatures given by other people are only ballpark figures to me, there are so many variables that influence extruding i allways test and tweak for myself. As long as the temperature is stable i don't mind if it's of compared to others... Americans can print to, and they use a completely different scaleby Banjer - General
REPRAP SQUAD Wrote: ------------------------------------------------------- > I highly doubt it would be free to sell your > designs. I was talking about free as in freedom, not free as in free beer. And sure, a middleman drives up the costs, but it also frees the creator of a lot of hassle, giving them more time to create. Personally, i couldn't be arsed with the trouble selling my creby Banjer - General
REPRAP SQUAD Wrote: ------------------------------------------------------- > I believe should be up to the owner. I couldn't agree more, but it also means that if the owner/creator wants to sell his stuff via a company the should be free to do that.by Banjer - General
I wouldn't mind filling in a survey, but i would at least want to know where it is coming from, and what the plan is....by Banjer - General
How are you testing the fan? It wont run until it's told to, wich you can do by sending M106, or using the fan controls in pronterface/repetier host.by Banjer - Reprappers
restcrew Wrote: ------------------------------------------------------- > My settings are attached couple of posts above! Seems i overlooked that.. thanks anywayby Banjer - Mendel90
Restcrew, those are nice prints. Would you mind sharing your Kisslicer configuration?by Banjer - Mendel90
Put ; Heated bed control M190 S In the prefix printer g-code, this will tell the printer to start heating the bed and wait until the temperature is reached. The default inserts M140, wich will start heating the bed, but won't wait for it to get to the correct temperature.by Banjer - Mendel90
I doubt you would want that. It would mean that one nozzle would be higher then another and the head would need to move down, which could result in the lower nozzle hitting the print. IMO any z-offset should be take care of in the printer (as in, there shouldn't be any)by Banjer - Slic3r