Show all posts by user
p.s. RepRap.org isn't responsible for scams and bad deals.
Spools form Colorfabb Form Futura and Polysmooth - 6 years ago
Various types and colors, all sealed in the original package. From ColorFabb Carbon to FormFutura wood filaments. Just ask me and I check what is there in terms of materials and colors. I am selling them due to overstock (or better over estimation of work load) I am located in Belgium.by Fpex - For Sale
FelixPro 1 upgraded to 2 - 6 years ago
I have a FelixPro 1 that was factory upgraded to pro2 (except for the useless touch screen). It is in very good conditions and it includes spare beds, spare bed heaters, two complete ruby heads, two complete 0.35mm heads, two complete 0.5mm heads, plus several spares Last factory calibration was last summer. I am selling it due to reduced interest in 3d printing. See here for pictures: Feel frby Fpex - For Sale
Re: DUET WIFI is here and now? - 8 years ago
I need to try it, but i was told it can be done in the additional commands section with the replace directivesby Fpex - Duet
Re: DUET WIFI is here and now? - 8 years ago
It has to be done in the script section by hand.by Fpex - Duet
Re: DUET WIFI is here and now? - 8 years ago
Wonderful! I think this is possible with S3D than I am using for everything now. Let us know when the duet x5 is available, it might be the moment to also get a second wifi since I might replace the rumba in my BigBox with it.by Fpex - Duet
DUET WIFI is here and now? - 8 years ago
I just received a duet wifi, batch 3. Looks lovely, but no the question is what am I going to put it on? Originally I was considering a kossel (maybe with a chimera), but I saw recently a diamond kossel (the three color hot end thing). Does the firmware support it? When will there be an extension board for more extruders?by Fpex - Duet
Re: Tallmerod conversion, new firmware and DWC betas, and several new parts - 8 years ago
I am also looking at converting to Tallmerod also because some parts are cracking and basically I need to replace the Z axis anyhow. I will not use the DuetWifi thought, will I am going to read your blog post for ideas :-)by Fpex - Ormerod
Re: how to change the web interface port - 8 years ago
I admit, I was wrong. Thanks again.by Fpex - Ormerod
Re: how to change the web interface port - 8 years ago
That is for IP, i need to change the web interface port form 80 to something else. I was digging in the FW and I fear the only way to dp it is to change this part of Webserver.cpp switch (localPort) { case ftpPort: /* FTP */ interpreter = ftpInterpreter; break; case telnetPort: /* Telnet */ interpreter = telnetInterpreter; break; default: /* HTTPby Fpex - Ormerod
how to change the web interface port - 8 years ago
I was looking at the code and it seems not immediate. Looks like I might need to change the code adding a case to the web server switch when listening to ports. Is there any other easier way?by Fpex - Ormerod
Re: What rod for a Tallerod? - 8 years ago
I was lookign at something similar from misumi (somewhat too expensive)by Fpex - Ormerod
What rod for a Tallerod? - 8 years ago
Now that I have the time, I am revoking at making my OM2 taller, I did have all parts but the M5 rod of 567mm is simply too tall and to soft. It got bended even in the shipping. What if I move to an M8 or M11? Where can i find the at decent price? I guess I will need to recalculate all steps for the z axis also ...by Fpex - Ormerod
Re: Duet WiFi details published, pre-order window open - 8 years ago
Sounds nice even if my next two printers are either a 300x300 with a 400W 24v heater and a kossel (my first one is gone as did not came out well). I guess I will use the duet for the kossel. Still, I might look at a better round plate for the kossel instead of a standard 20x20 I haveby Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
But I guess it will not be able to drive a large 24v plate, right?by Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
I might have missed, will this board work also on 24v?by Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
I ordered one before the brevet at a much higher pound value, but no regrets. For as much anger I have for UK and its unilateral decision to bring us all back to a 2008 crisis (or worse), I do not mind have given you my support.by Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
It happened, not is the time to order more from UK ... pound going down and duty costs not there yet. This said, I hope David (DC42) and co. are not sourcing from Europe for manufacturing or dealing in EUR/$or they risk to take a bit hit on their costsby Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
Just ship soon ... I would hate to be asked to pay import duty one you guys (UK) leave us (EU) :-)by Fpex - Duet
Re: Laser cut Aluminium X-Arm & Rib kits.... - 8 years ago
What is the advantage for a bed for the O2? I will soon modify my ormerod into a tall one and might consider other changes as well.by Fpex - Ormerod
Re: Duet WiFi details published, pre-order window open - 8 years ago
5 drivers, it is written. It supports two extruders out of the box/by Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
Well, I took batch 3 because of my holidays and I hope by then I have solved all issues with my printers and feel like building another one :-) In any case, you guys need support from any duet user because of the past and future workby Fpex - Duet
Re: Duet WiFi details published, pre-order window open - 8 years ago
Just got one on batch 3 ... not a real need here, but the work looks great nd I give my support to the team for sure!by Fpex - Duet
Re: Duet development news - 8 years ago
The narrow hobb is a faulty one , this is what i just learnt.by Fpex - Duet
Re: Duet development news - 8 years ago
My opinion of the titan might change, I just discovered mine are defected by birth ... looks like they need replacing. Waiting for e3d to confirm it or not. Also I follow david advice. For the extruder I use a thinner motor with less torque.by Fpex - Duet
Re: Duet development news - 8 years ago
Quotedeckingman Should I be looking at anything special in the way of extruder stepper motors to take advantage of any of this? I'll shortly be ordering 3 off E3D titans (thanks for the idea DC42 although initially I thought they were too expensive) and I was just going add whatever steppers they (E3d) supply. Titans are ok. They bring geared to direct drive, but to be fair they are not that nicby Fpex - Duet
Re: Duet development news - 8 years ago
If i had a printer to build and no duet 0.8.5 laying around, I would immediately pre order !by Fpex - Duet
Re: Laser cut Aluminium X-Arm & Rib kits.... - 8 years ago
I would be interested in the foot and maybe a pat that can better lock the Z and Y at 90degby Fpex - Ormerod