Show all posts by user
p.s. RepRap.org isn't responsible for scams and bad deals.
Re: Help a non-techie with 4 issues with his Huxley - 11 years ago
Hey KennethY89, We can supply parts for RepRapPro Huxley kits. We don't list everything in our webshop, but I can sort you out a quote for the parts you would like if you email me on info (at) reprappro (dot) com. The belt used in our Huxleys is MXL belt as listed here: Best wishes Sally RepRapPro Ltdby SallyRepRap - Huxley
Re: RepRap presence at Bristol Model Engineering and Hobbies Exhibition - 12 years ago
RepRapPro Ltd will be at the exhibition. We will be exhibiting our RepRap printers, along with a range of items we have printed to show off their capabilities. We also hope to have some of our research and development team on hand to show off what we have been working on recently. Sally Sally Bowyer RepRapPro Ltdby SallyRepRap - West of England RUG
Re: Multi Material with one Extruder - 12 years ago
Quotedc42 The other idea I had was to modify a nozzle to accept 2 or 3 filaments directly, perhaps by drilling it out and inserting a machined PTFE mixing block. Then the area shared by filaments would be hot and less susceptible to blockage. However, that would require the use of precision machine tools to make it, and I don't have access to those. Bit of a teaser.... There will hopefully be soby SallyRepRap - Ormerod
Re: Multi Material with one Extruder - 12 years ago
Hi David, The three top brass connections are exactly the same as the standard ones that go into our normal extruder drives, the Bowden start - . The bottom one that connects to the hot end is a special one that has a slotted top like the Bowden starts mentioned above and an M5 external thread at the bottom like the Bowden end The inside of the threaded end of this is drilled out to 3mm toby SallyRepRap - Ormerod
RepRapPro Assembled Hotends now available - 12 years ago
We have assembled hotends for Ormerod, Mendel, and Huxley with either a 0.5mm or 0.3mm nozzle. For £39.92 plus VAT (if applicable) and shipping. We ship worldwide. If you have any questions, do get in touch. Best wishes Sally Sally Bowyer RepRapPro Ltdby SallyRepRap - For Sale
RepRapPro Kits and Spares - 12 years ago
We have recently been updating our webshop to include lots more components for RepRap kits. From bearings to motors, glass clips to hot end parts all available here - We also have Ormerod, Mendel and Huxley kits available either with or without printed parts - Hot end kits for all three of our kits are available here If you want to place an order, but can't find what you are looking for, jby SallyRepRap - For Sale
Re: Multi Material with one Extruder - 12 years ago
Hi, All the details are on the Ormerod Github in the Dev branch. See here: Multicolour Firmware in the test branch here: Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: RepRapPro Ormerod Proximity sensor? 
- 12 years ago
Hi, We can supply pretty much any part of our printers as a spare part. If there is something you want that you can't find on our webshop. just email me on the sales email - info at reprappro dot com and I can send over a quote - just need to know the parts you are after and where we would be shipping to. The Proximity sensor is £7.62 plus VAT (if applicable) and shipping. If you want to sourceby SallyRepRap - General
Re: Ormerod timing belt type? - 12 years ago
Hi, You can also order a length from us if you have trouble sourcing it. 1.7m (Ormerod length) is £5.25 plus VAT (if applicable) and shipping. Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: Assembling a 0.3 mm hot end - 12 years ago
It will produce finer prints, but it doesn't take proportionately longer. This is because the infill can be made relatively coarser and so happens almost as fast as for a coarser nozzle. There is very little impact on strength when doing this.by SallyRepRap - Ormerod
Re: Assembling a 0.3 mm hot end - 12 years ago
Hot end kits now available on the webshop - Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: Assembling a 0.3 mm hot end - 12 years ago
Yes, they are available as a kit. The Ormerod Hot end kits are £29.91 plus tax (if applicable) and shipping. We can include a 0.3mm nozzle. They will soon be up on the webshop. In the mean time if you send me over an email I can create an order for you. Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: Jobs with RepRapPro Ltd in the UK - 12 years ago
Hi Chris33, Yes, I am afraid so. If we have any further vacancies we will post them here. Best wishes Sallyby SallyRepRap - Jobs for people with RepRap skills
Re: Dual Extruders - 12 years ago
We are currently working on the development of the multi-material version of Ormerod. As it's in development, no definite ETA. Most parts are actually in place - the Duet has a daughter board to support extra extruders, the firmware is written, we're just playing around with how to mount it mechanically. See this recent blog post from Adrian: And this older post regarding the Duet and firmware:by SallyRepRap - Ormerod
Re: Were can i buy parts for the Ormerod ?? - 12 years ago
Send us an email with a list of parts and the shipping destination and I can put together a quote for you. We can accept payment via Paypal, bank transfer or card payment over the phone. info (at) reprappro (dot) com Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: Jobs with RepRapPro Ltd in the UK - 12 years ago
We currently have a vacancy for a Production Assistant. See here for further details Best wishes Sally Sally Bowyer RepRapPro Ltdby SallyRepRap - Jobs for people with RepRap skills
Re: X axis problem - 12 years ago
@Ian - I have the email in my in-hand :-) @Tsessebe - just emailing you about sending out a replacement Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: X axis problem - 12 years ago
Send an email through to us at support at reprappro dot com with all the details of the problems. We can replace just the duet if that is the cause of the problem. You don't need to send back the whole printer. Best wishes Sally RepRapPro Ltdby SallyRepRap - Ormerod
Re: Article for Magazine Issue 4 - Practical 3D printing - 12 years ago
Hi Rich, We have this on our workshop - Best wishes Sallyby SallyRepRap - RepRap magazine
Re: Lead time/ waiting time - 13 years ago
Hello All, First of all I would like to apologise to anyone who has ordered a kit from us that has taken a few day's longer than the advertised lead time to dispatch. We have had a large volume of orders for all of our kits over the last few months, which is why we have had a long lead time. We do our utmost to ship by the lead time given in our advertising. This lead time gets increased andby SallyRepRap - General
Re: Making a RepRapPro Huxley - 13 years ago
The pulleys are the same for the Mendel - this should be the ones you are afterby SallyRepRap - Huxley
Re: nextdayreprap.co.uk - 13 years ago
Hi waitaki, I thought I had answered why our (RepRapPro's) lead times were as they are? As far as I am aware RepRapPro have not received an email from Marcx? Best wishes Sally RepRapPro Ltdby SallyRepRap - General Mendel Topics
Re: Mendel Versions - 13 years ago
Hello, We would advise that you use the plastic parts that are designed to go with our hardware kits. If you can find someone to print them for you the design files are in our Github - All build instructions are here: Let me know if you have any further questions about our kits. Best wishes Sally RepRapPro Ltdby SallyRepRap - General Mendel Topics
Re: nextdayreprap.co.uk - 13 years ago
20 working days is currently the longest time you will wait for one of our kits - if the kit is ready before then, it will ship before then. We have a lot of factors affecting our lead times including printing time, supplier deliveries and stock quantities and also the volume of orders being placed with us each day. If you do have any further questions about our kits, let me know. best wishesby SallyRepRap - General Mendel Topics
Re: Make this forum and RepRap.org faster, You can help! - 13 years ago
Hello All, Thanks to Bill2or3 there have been some adjustments made to the RepRap server. There are more things that we can do, but we want to see what the improvements we have made achieve first. Please let us know if you see an improvement or if you don't.by SallyRepRap - General
RepRapPro New Year sale now on - Mendel and Huxley kits reduced - 13 years ago
We are having a sale! All Mendel and Huxley Kits are included in our New Year Sale. For further details see here:by SallyRepRap - For Sale
Re: Beginner - 13 years ago
Hi, The kits print at approximately 20grams per hour. You can use either PLA or ABS. Best wishes Sallyby SallyRepRap - General
Re: Beginner - 13 years ago
Hello, See here for filament suppliers - You will need 1.75mm filament to work with our extruders. If you do purchase a kit from us, you will get a 100m sample of PLA with the kit. If you purchase once we have sold out of our Christmas kits, your kit will be shipped on or before the given date on our website at the time of ordering - it is likely to be in January as we will have a short Chriby SallyRepRap - General
Re: Beginner - 13 years ago
Hello, For examples of what our kits can print we have a gallery on our website here - See also this blog post Best wishes Sallyby SallyRepRap - General
Re: Making a RepRapPro Huxley - 13 years ago
Hello, See here: Best wishes Sallyby SallyRepRap - Huxley