Charles, I sent you an email with those documents. I am working on getting the documents set up in the wiki as recommended by Sebastien, but I am fairly busy and terribly unfamiliar with the wiki template. I am sending some questions to Sebastien that will hopefully solve some of my current hurdles.by kymberlyaandrus - For Sale
Cid, There are probably many people who can give you a better, more complete answer than I can, but here is what I know. Plywood, because how it is manufactured does not have highly consistent thickness, which means that the surface is not perfectly flat (not that any surface is perfectly flat, but plywood varies more than is desirable for this project) MDF is a pressed product, so its surfacesby kymberlyaandrus - For Sale
Eric, Spacexula, all others who are interested. I can provide the drawings as pdf's, since that is the only method of exporting them from my software. I can provide a pdf for each "layer" of a gerber file. If you are using a full version of adobe, it even makes them editable. When I say that the program I use is proprietary, I mean it. I have no way to export a gerber or any other form of usefulby kymberlyaandrus - For Sale
Tonokip, to connect the blue and white connectors, I usually just use a small flat blade screwdriver. It is a good idea to test the cables with a multimeter afterward... to make sure they will work.by kymberlyaandrus - For Sale
I can get you Bare PCBs for 29.75 per set. The set includes: 1 Mainboard, 1 Extruder, 3 Stepper Motor Controllers, 1 USB to TTL and ,3 opto-Endstops. And yes, I have a complete list of components needed to finish the boards. I can ship up to 20 sets for 13.00 via USPS Priority Mail for 6-10 Business Days Shipping The cost breakdown per board is: Mainboard: $7.50 Extruder: $6.00 Stepper Motor Coby kymberlyaandrus - For Sale
American Standard 1/4" which puts it at almost exactly 6mmby kymberlyaandrus - For Sale
Yes, I can do MDF for the same price. Matter of fact, I will make the build plate MDF on all orders and the rest of the pieces the high-density birch plywoodby kymberlyaandrus - For Sale
I have sets of PCBs as kits assembled or unassembled. I am in the US but ship to the UK regularly and can ship a set assembled w/o a power supply for $191.00 plus shipping (as low as $13.00 per set)or less without components.by kymberlyaandrus - For Sale
I debated about listing these, but then I saw them for sale for $45.00. These are a high density birch plywood set that are laser-cut and I can sell them for $30 a set. I prefer paypal. Email me at kymberlyaandrus(at)yahoo.com for questions or shipping costs. After rethinking this, I chose to make the build plate out of high density ply-wood with a inset aluminum plate. Next week I will raise tby kymberlyaandrus - For Sale
Those are a picture of our electronics we shipped. Thanks for pointing them out.by kymberlyaandrus - For Sale
Although the board is smaller, the chip is the same chip. Heat dissipation characteristics of this chip are not dependant on the board design (but I have done what I can to enhance them, ie a small thermal pad on the back and some thermal vias) If you want to increase the heat capacity of the chip, put a small heatsink on the top, or set a fan to blow across it (the fan actually makes a bigger dby kymberlyaandrus - For Sale
We accept Paypal for payments and we do have more parts in stock.by kymberlyaandrus - For Sale
We have recieved more parts. We have relisted on ebay for those who prefer to buy through ebay. We listed two ways; 1. With power supply link 2. Without power supply linkby kymberlyaandrus - For Sale
I do not have a datasheet for these motors; Also, I am out of these motors. Sorry.by kymberlyaandrus - For Sale
Joe, we have some more. You will not be able to switch out the header, but you can make a small cable adapter. Thanksby kymberlyaandrus - For Sale
I am not willing to wait that long to get paid.by kymberlyaandrus - For Sale
I have listed these electronics kits also on Ebay for those who are more comfortable with sales through Ebay. It is listed at $226.00 to help cover Ebay fees. You can see it at:by kymberlyaandrus - For Sale
I ordered in six different motor samples for testing.... five of them worked. The only one that didn't work is a motor that had no specs published. Some of the motors that worked also had no specs published (just the physical size, number of wires, and 1.8degrees per step) my favorite is a nema 17 motor that didn't have much for specs published, it works like a charm, with plenty of torque, theby kymberlyaandrus - General Mendel Topics
Unfortunately I do not... I ordered in a sample to see if it would work and it does seem to work. I have a manufacturer and model number, but could find no spec sheet: it is a Sanyo Denki type 103h548-4946 it is 1.6 ohm (from the label on the motor)by kymberlyaandrus - For Sale
Stepper Motor for XYZ Axis for $11 1.8 Degree steps NEMA17. PLENTY of Torque I also have a complete Electronics kit available for sale that includes all electronics boards needed for the RepRap Mendel(generation 3 electronics) and also a USB to TTL adapter, a universal 12v 5A power supply, and a cable kit to wire it all together for $215.00by kymberlyaandrus - For Sale
This geared stepper motor has a 50:1 gear ratio on on 7.5 degree step, giving plenty of torque and finer resolution for your Mendel print system. Notice the shaft is slightly offset and the mounting holes are not Nema17 so your mounting might require slight modification I also have a complete Electronics kit available for sale that includes all electronics boards needed for the RepRap Mendel(genby kymberlyaandrus - For Sale
We do ship to the USA (that is where we are, so that is actually what is easiest for us). We can usually ship within three days of recieving payment (sometimes sooner, depending upon how backed up I am on testing - each board get tested to make sure it functions properly after assembly).by kymberlyaandrus - For Sale
Hi Idaholion: Our board is functionally the same as the makerbot boards. the connectors are all set up as if you had used a makerbot board and built it for the RepRap Mendel (on the reprap website). The stepper controller boards are $4.00 each - for an extra $2, I can include a plastic, laser cut solder paste template if you would like. The components for the boards (chips resiters capacitorsby kymberlyaandrus - For Sale
This is the same circuit as the makerbot motherboard. So it is a Sanguino compatiblee and runs the same software. It uses the same 10 pin headers to controll the steppers motors, so that it is compatible with the other items designed for the RepRap Mendel.by kymberlyaandrus - For Sale
yes, I would sell you a couple of PCBs; but a some of your parts won't fit... I didn't hold to a strict rule of 0805 footprint components... some of mine are 0603 (for availability and cost reasons... as well as space) and I do not use the 100uf cap; I use a Ceramic SM 10uf instead; also, the 10K pot I used is smaller physically and is surface mount.... and the 5v Regulator is changed to a TO220by kymberlyaandrus - For Sale
My intent is to provide this as a kit eventually; so, YES I will provide files, BUT they are not the same as the other files that have been previously provided (I don't use Eagle, I use a proprietary software... so you won't get the pcb layout file... but, I will provide a color PDF of it) I will also be creating a page that is a "blown up view" with parts labled for their locations - this is dueby kymberlyaandrus - For Sale
This a complete Assembled Generation 3 Electronics Kit for RepRap which has: 1 Mainboard Ver 1.2 1 Extruder Controller Ver 2.2 3 Stepper Motor Controllers Ver 2.3 3 Opto-End Stops 1 USB-TTL Adapter 1 Universal 12v 5A Power Supply 1 Cable Kit These boards have been modified from the Makerbot version to be just for the RepRap and have been reduced in physical size.Please look at the individual poby kymberlyaandrus - For Sale
This is a USB to TTL Adapter for the RepRap. This the same chip as the one referred to on the RepRap webiste only it is already modified and wired for the RepRap. I prefer payment through PayPal. Please contact me at kymberlyaandrus(at)yahoo.com for questions, and shipping information. I also have a complete Electronics kit available for sale that includes all electronics boards needed for theby kymberlyaandrus - For Sale
This is Universal 12V 5A Power that can be plugged into your 120 or 240 outlet and hardwired upto your RepRap. I prefer payment through PayPal. Please contact me at kymberlyaandrus(at)yahoo.com for questions, and shipping information. I also have a complete Electronics kit available for sale that includes all electronics boards needed for the RepRap Mendel(generation 3 electronics) and also a Uby kymberlyaandrus - For Sale
This a RepRap mainboard ver 1.2, we have modified to make it smaller than the Makerbot version. It includes all the RepRap modifications :removing all the arduino headers,changing the SD slot to a Micro SD and soldering the Micro SD slot on the backside.I prefer payment through PayPal. Please contact me at kymberlyaandrus(at)yahoo.com for questions, and shipping information. I also have a complby kymberlyaandrus - For Sale