Mowi printer
Mowi_printer Documentation
Mowi Printer
Release status: experimental
Description | The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.
|
License | GPLv3
|
Author | |
Contributors | |
Based-on | |
Categories | Foldable RepRap, Development
|
CAD Models | soon
|
External Link | soon
|
Introduction
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing. The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.
Specifications
- Printing Size: 260mm x 200mm x 195mm
- Folded size: 400mm x 330mm x 86mm
- Printed Parts: 8
- Lasercut parts: 21
- Bought Parts: ???
- Electronics: Ramps 1.4
Main Open Issues
- The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)
- The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage.
- X- Carriage can only be printed with support and needs a lot of cleaning.
- Dual extruder calibration.
- Easier Assembly
- Less different vitamins
Bill of Materials
Not complete
- Printed Parts
- Lasercut Parts, birch plywood, 2,3 and 6 mm
- Electronics: Ramps 1.4
- Display: RepRapDiscount Smart LCD Controller
- Heated Bed: MK2B
- Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm
- Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length
- Hotends: 2 pcs reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament
- Pulleys and belts: GT2
- Endstops: RepRapDiscount hallendstops
- Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ
- Power Inlet
- Switch
- USB inlet
- Smooth Rods 8mm
- Threaded rods 5mm
- Woodscrews Countersunk Sp 2,5 x 20
- Assorted screws, nuts, bolts and washers