Tweezers
Revision as of 20:31, 9 September 2010 by Sebastien Bailard (talk | contribs)
Tweezers
Release status: unknown
Description | |
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
I needed a pair of tweezers, so I designed the following pair. The end of the tweezers consists of a PLA inner section for rigidity/stiffness, which is then encased in silicone for added grip. The entire thing is printed in one shot using our multiple material setup(highly experimental!).
For more details see the blog post here
File:Tweezers.zip - Zip file containing the STLs