Belts and Pulleys
See also Choosing_Belts_and_Pulleys
Belts
| Supplier | From | Type available | Pitch | Width | Length | Material | Approximate Cost | Additional notes |
|---|---|---|---|---|---|---|---|---|
| BBMan | US | Imperial/Metric | ||||||
| Belting Online | UK | many | ||||||
| Econobelt | US | many | ||||||
| Misumi | multiple | |||||||
| Royal supply | US | GT2 | 2 mm | 6 mm | 1164 mm | fiberglass / nylon / neoprene | 5,48 $ | - |
| SDP-SI | US | Imperial/Metric | ||||||
| TechPaladin | US | GT2 | 2 mm | 5 mm | 1160 mm | neoprene | 8,50 $ | - |
There is also some on ebay.
Pulleys
| Supplier | From | Type available | Pitch | Tooth | Size (bore, OD,...) | Max belt width | Material | Approximate Cost | Additional notes |
|---|---|---|---|---|---|---|---|---|---|
| BBMan | US | many | |||||||
| Econobelt | US | many | |||||||
| Misumi | multiple | ||||||||
| Royal Supply | US | GT2 | 2 mm | 18 | 4,7 mm | 6 mm | Alu | cost | you'll need to redrill the bore (3/16") to fit usual 5 mm motor shaft |
| SDP-SI | US | many | |||||||
| TechPaladin | US | GT2 | 2 mm | 36 | 5 mm | 6 mm | plastic/bronze | 6 $ | - |
| Ultimachine | US | GT2 | 2 mm | 20 | 5 mm | 6 mm | Alu | 11 $ | use two set screws |
There is also some on ebay.
