Talk:Teensy Breadboard
The transcript about compiling Teacup apparently requires a working Teacup in another directory already. Maybe this is more helpful for beginners (edited transcript):
$ git clone https://github.com/triffid/Teacup_Firmware.git Cloning into 'Teacup_Firmware'... remote: Counting objects: 3911, done. remote: Compressing objects: 100% (1249/1249), done. remote: Total 3911 (delta 2827), reused 3689 (delta 2643) Receiving objects: 100% (3911/3911), 2.00 MiB | 624 KiB/s, done. Resolving deltas: 100% (2827/2827), done. $ cd Teacup_Firmware/ Teacup_Firmware $ git checkout Gen7 Teacup_Firmware $ cp config.teensy.h config.h Teacup_Firmware $ cp ThermistorTable.single.h ThermistorTable.h Teacup_Firmware $ vi Makefile # uncomment atmega32u4, comment out atmega644p Teacup_Firmware $ make CC mendel.o ...
Possibly. --Traumflug 11:55, 15 November 2012 (UTC)
Done. Tested on 2012-11-25 per http://reprap.org/wiki/Teensy_Breadboard#Compiling_Teacup_for_Teensy_using_the_Makefile -- DaveX 18:33, 26 November 2012 (UTC)