Category:Prusa i3 Development
Contents
Dutchie3719's Partial SAE Conversion
Currently in development is a partial SAE conversion
All Manufactured Parts will be manufactured using SAE tooling & measurements
All Rods will Remain Metric
All Bolts & Hardware will Remain Metric
Changed from RP to CNC
- Y-Corners.stl
- Z-axis-bottom.stl
- Z-axis-top.stl
- Ymotor.stl
Changed from AWJ / Laser to CNC
- Prusa3Wood-v4.dxf
CAD / Solidworks Most STL files are being re-drawn from .STL Form to .SLDPRT and engineering drawings will be produced.
Thingiverse
There's a number of interesting add-ons for the Prusa i3 on Thingiverse.com. Search for 'i3'.
Prusa i3 Improved for laser cut by Twelvepro.com -[ http://www.thingiverse.com/thing:39889]]
note on alluminium 6mm dxf file
A note if getting the frame cut make sure the holes are smaller waterjet cutting made them 3.25 to big to tap m3
Complete Laser Cut Design by S. Graber (no printed parts)
- Complete laser cut design by S. Graber (no printed parts) - http://twelvepro.com/index.php?route=product/product&product_id=52
- Assembly pictures are here - http://twelvepro.com/news/?page_id=31
Pages in category "Prusa i3 Development"
The following 23 pages are in this category, out of 23 total.