Filament drying/de
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Filamente trocknen
Am leichtesten lassen sich Filamente im Ofen knapp unter iherer Glasübergangstemperatur trocknen. Dazu legen sie die Filamentspule in den Ofen nachdem dieser die Zieltemperatur erreicht hat. Die Filamentspule verbleibt jetzt für 4-6 Stunden im Ofen, so dass die Feuchtigkeit ausgetrocknet wird.
Material | Tg (°C) | Ofentemperatur | Komentar |
---|---|---|---|
Reifengummi | -70 | ||
Polyvinylidenfluorid (PVDF) | -35 | ||
Polypropylen (PP atactic) | -20 | ||
Polyvinylfluorid (PVF) | -20 | ||
Polypropylene (PP isotactic) | 0 | ||
Poly-3-hydroxybutyrate (PHB) | 15 | ||
Polyvinyl acetate (PVAc) | 30 | ||
Polychlorotrifluoroethylene (PCTFE) | 45 | ||
Polyamid (PA) | 47 | ~ 80 | Nylon |
Polylactic acid (PLA) | 60 | ~ 40-45 | |
Polyethylene terephthalate (PET) | 70 | ||
Polyvinylchlorid (PVC) | 80 | ||
Polyvinylalkohol (PVA) | 85 | ||
Polystyrene (PS) | 95 | ||
Poly(methyl methacrylate) (PMMA atactic) | 105 | ~ | Plexiglas |
Acrylonitrile butadiene styrene (ABS) | 105 | ~ 80 | |
Polytetrafluoroethylene (PTFE) | 115 | ~ | Teflon |
Polycarbonat (PC) | 145 | ||
Polysulfon | 185 | ||
Polynorbornene | 215 |
von [1]