Mendel circuit boards
You may find the Mendel assembly data sheet useful during assembly.
Top circuits
BOM
Total # of assemblies: 1
Name | Qty/assembly | Total Qty | Type |
motherboard-plate.par | 1 | 1 | Sheet |
extruder-controller-v2-2.par | 1 | 1 | PCB |
reprap-mother-board-v1.1.par | 1 | 1 | PCB |
m3-capx20.par | 6 | 6 | Fastener |
m3-nut.par | 12 | 12 | Fastener |
m3-nylock.par | 6 | 6 | Fastener |
m3-washer.par | 24 | 24 | Fastener |
Assembly
M3 nuts are used as spacers to elevate the boards slightly. This will help get your wiring neater later.
Bottom circuits
BOM
Total # of assemblies: 1
Name | Qty/assembly | Total Qty | Type |
stepper-plate.par | 1 | 1 | Sheet |
xlr-bracket_1off.par | 1 | 1 | RP |
stepper-motor-driver-v2-3.par | 3 | 3 | PCB |
usb-female-b-type.par | 1 | 1 | Electronics |
usb-female-pcb.par | 1 | 1 | PCB |
xlr-female-d-type.par | 1 | 1 | Electronics |
m4-nylock.par | 14 | 14 | Fastener |
m4-washer.par | 52 | 52 | Fastener |
m4x16-cap.par | 12 | 12 | Fastener |
m4x40-cap.par | 2 | 2 | Fastener |
RP parts
Assembly
Stepper driver PCBs are elevated from the sheet by two washers.
Back to Mendel mechanical construction root.