Basic Starter Working Configurations
So you have built your 3D printer... Now there are very many configurations due to the diversity of the RepRap Project.
Here is a list of some basic Known to be working configurations collect from RepRappers using their 3D printers.
So make this as useful as possible we need to define a standard method to define the basic configuration.
Each configuration has a Electronic hardware description the physical definition of your 3D printer is not coverd by this description.
____________________________________________________________________________________
RepSnapper Basic Windows Configuration Mendel RAMPS 3D printer mechanism.
Host OS ~ Windows 7 64bits
Motherboard for Firmware ~ Ultimachine Ramps 1.1 Ramps
Software http://svn.kulitorum.com/RepSnapper/MSVC9/Release/RepSnapper.exe
Firmware https://github.com/johnnyr/Tonokip-Firmware (BaudRate: 115200, Special Conf: Inverse Opto)
Full Package http://www.gamefront.com/files/20188808/RepRap-Tonokip-Repsnapper.zip (+ config file)
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________Media:Example.ogg