Laser Cut Mendel Pulleys
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: experimental
Description | |
License | unknown
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Mendel uses belt pulleys in driving it's x,y and z axis as well as in it's driven z axis threaded rods. The problem is that many cheap 3d printers such as the Makerbot, RepRap, etc. are still working on being able to print accurate parts. The lack of symmetry in these parts caused by printer inaccuracy can then cause further inaccuracy in the child printer. This is a version of each gear in Mendel that can be cut by a high precision laser cutter or CNC mill so as to increase the precision of Mendel.
This page/project is under development. Please do not use the files provided until this message is removed
DXF Files
drive-pulley_3off
- File:Laser-cut mendel gear - drive-pulley 3off - gear.dxf
- File:Laser-cut mendel gear - drive-pulley 3off- nut trap.dxf