Lewis
Revision as of 22:27, 23 May 2012 by Insilicoresearch (talk | contribs)
Lewis Documentation
Lewis
Release status: Experimental
Description | A less linear RepRap
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
The RepRap Lewis is named for Edward B. Lewis, an American Geneticist. The primary design goals are accessible documentation and high replication ability. All working documentation and recommendations are stored on the RepRap wiki.
Design Constrains
This is an entry into the Gada Prize. Following, our design goals match the prize requirements. Unique ones for Lewis are as follows.
- Fit into a small flat rate USPS box (about 220mm x 135mm x 41mm)
Development
If you would like to follow the latest developments, follow the Insilico Research blog.We are working on setting up a git repository for the project as well.
Downloads
- File:Uploaded files example.zip
- File:Even more example files.zip
- File:Example part.stl
- File:Other example part.stl
Photos and Drawings
Links can be put in captions.