BEEF
Contents
Working Notes. Please Log in and Edit.
Please find attached the basic schematic and notes for the breakout and prototyping cards.
Actual board designs to follow as I do them.
Please find attached the single sided board layout for the breakout board. Not this is intended for one or a mix of:-
Soldering Ribbon Cable Headers to. Soldering wire/cable direct to. Soldering Screw Terminals withe a 0.1" or 2.54mm pitch to.
So you can connect other cards etc to the backplane without the need for a dedicated card. This should let you use legacy RRRF boards with the backplane model.
Files
These Files are Mirrored
These files are mirrored in: http://dev.forums.reprap.org/read.php?13,33975 and the Official Repository along with the Library. This is part of the Hall of Mirrors Problem and the Other Spaces Problem. Yes, this is a Library problem, which we will have to figure out.
Working Title
aka47 Controller Or "move" this page to another page with a good title.