Alubot
Revision as of 13:23, 5 May 2013 by Robinarvidsson (talk | contribs)
Alubot
Release status: concept
Description | Alubot is one of the easiest to build Reprap 3D printer, and uses Aluminum t-slot as frame.
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | none
|
CAD Models | none
|
External Link | none
|
ALUBOT
Info
Alubot aims at beeing one of the most easiest to build 3D printers, and uses the concept of Reprap to do so. Alubot consist of 7 equally long t-slot aluminium extrusions, 10 90degrees brackets, 4 smoothrods, 2 threaded rods, 5 motors and more. Alubot is easy to scale, by adjusting the length of the aluminium extrusions, smooth rods and the threaded rods. but i would still advice to build the printer for a printarea of 20x20cm to maintain quality.
Parts
Updated shortly
RP Parts
Updated shortly
Vitamins
Updated shortly
Electronics
Updated shortly