3DPrintMi
Revision as of 09:57, 29 May 2013 by Gyronictonic (talk | contribs) (Created page with '{{Development:Stub}} {{Development |name = 3DPrintMi |status = experimental |image = 3DPrintMi.JPG |description = Open Frame Reprap |license = GPL |author = Gyronictonic |r…')
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
3DPrintMi
Release status: experimental
Description | Open Frame Reprap
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
http://gyroe3dprinter.blogspot.com/
Specifications
- Printed Parts: 31
- Non-Printed Parts: 275
- Material Cost:
- Printed Parts = ?
- Vitamins = ?
- Electronics = ?
- Cost: $350 - $450
- Printing Size: 152mm x 152mm x 200mm (6" x 6" x 8")
- Precision: ???
- Speed: 50mm/s perimeter, 120mm/s infill
Features
- Vertical X Axis Standard - Can use Prusa standard X Gantry
- No specially made parts (lasercut)
- Able to configure print area for PLA, ABS or both.
- Can mount Wade Extruder/Bowden or Direct Drive (QU-BD)
Bill of Materials
Count | Part |
---|---|
1x | test |
1x | test2 |