Search results
Create the page "%s" on this wiki! See also the search results found.
File:TechZone tip controller pinout.JPG ...r - the one which comes with their Huxley mono-board electronics (well, it's not so mono-board after all!)(1,596 × 1,120 (125 KB)) - 10:26, 26 January 2011File:Mendel x-axis on darwin.tar.gz since forever, and he's had lots of trouble with his X axis / extruder(26 KB) - 00:43, 27 October 2010File:Ultimaker bot.jpg This is Erik's prototype of the Ultimaker, with RGB led arrays installed. See http://www.u(1,600 × 1,200 (203 KB)) - 20:56, 2 December 2010File:Monotronics.jpg The image for Monotronics as seen on TechZoneCom's website.(1,728 × 726 (161 KB)) - 12:38, 2 January 2011File:Lasercut mendel andrus.jpg This is Lambert's picture of the Lasercut assembled chassis.(1,600 × 1,208 (302 KB)) - 13:11, 20 January 2011File:Huxley Y drive pulleys.jpg Idler-side Y-axis pulley on Huxley (AlexRa's variant)(800 × 645 (55 KB)) - 17:13, 30 January 2011File:Huxley Y idler pulley.jpg Idler-side Y-axis pulley on Huxley (AlexRa's variant)(800 × 850 (64 KB)) - 17:14, 30 January 2011File:LCD (Revar).jpg Picture of Revar's LCD.(500 × 375 (149 KB)) - 06:12, 2 February 2011File:OpenX Carriage Full Set.zip stl's and sketchup files(224 KB) - 12:08, 17 February 2011File:Prusawhite.JPG Prusa White Spacexula's 1st operational Mendel(475 × 463 (43 KB)) - 19:41, 13 February 2011File:Camielg hot end v4.jpg cross section drawing of camiel's hybrid extruder(776 × 929 (63 KB)) - 19:51, 14 February 2011File:Herringbone glowing2.jpg [http://reprap.org/wiki/RUG/Pennsylvania/State_College Unit One's herringbone extruder](383 × 353 (19 KB)) - 06:06, 5 March 2011File:Extruder class jpj12 2011-04-07 temp fix.pde Modified version of extruder_class.pde with brnrd's fix for the temperature overflow bug.(19 KB) - 12:20, 20 January 2015File:Vacuum cleaner STLs.tar A tar ball of STLs for Christopher Olah's 3D printable hand held vacuum cleaner. Source is available at https://githu(4.89 MB) - 13:51, 23 March 2011File:Skeinforge.jpg Screen shot of Kliment's portable Skeinforge(1,195 × 966 (3.31 MB)) - 11:00, 3 April 2011File:RepSkeRamTea Settings.zip ...working settings ReplicatorG-Skeinforge-RAMPS-Teacup for Mendel with Wayne's Extruder + Heated Bed(307 KB) - 08:53, 17 April 2011File:Drembolt.jpg Dremeled bolt alternative to hobbed bolt for Wade's extruder.(1,669 × 2,025 (491 KB)) - 22:08, 21 April 2011File:WoodenExtruderAssembly.png AlexRa's wooden (mostly) extruder tip assembly for Huxley (TZ)(741 × 870 (98 KB)) - 05:44, 22 April 2011File:Modified extruder.jpg An Accessible Wade's Extruder using Herringbone gears.(544 × 487 (36 KB)) - 00:12, 15 May 2011File:Lasercut huxley gear reassembled.png Here's the result of re-centering the washer on the gear. Used some little wood sc(1,024 × 768 (1.21 MB)) - 08:42, 22 May 2011