Search results

Jump to: navigation, search
  • File:Orca02 3200 y-frog01.jpg
    Orca's v0.2
    (1,349 × 971 (215 KB)) - 19:55, 27 June 2011
  • File:Orca02 3000 y-cluster01.jpg
    Orca's v0.2
    (1,327 × 961 (269 KB)) - 18:36, 30 June 2011
  • File:Orca02 3300 printbed01.jpg
    Orca's v0.2
    (1,331 × 963 (161 KB)) - 19:58, 27 June 2011
  • File:Heated Bed bottom.jpg
    My own heated bed - following nophead's design with Aluminum-clad resistors. Works okay for PLA so far..
    (432 × 576 (41 KB)) - 08:32, 8 July 2011
  • File:Lanthans cupcake.jpg
    Lanthan's cupcakestrap, started in 2010, finished summer 2011. Reproducing a Prusa.
    (1,280 × 1,111 (455 KB)) - 19:14, 27 July 2011
  • File:Caveat inertial mass.jpg
    ...th printed from exactly the same gcode, "all other things equal", at 25 mm/s. The one on the left shows obvious lost steps on the y axis.
    (1,280 × 960 (394 KB)) - 06:46, 2 February 2012
  • File:SmallHuxleyParts0.18mm.jpg
    These parts are for a Huxley. They were printed on Wildseyed's Prusa, Black Beauty, using a Wildseyed Simple Hot End and 0.18mm nozzle.
    (2,560 × 1,920 (959 KB)) - 18:36, 4 August 2011
  • File:Smooth rod collar.jpg
    * drill out the nut's center and apply 5-20 circular file strokes until the nut fits snugly the 8 * punch the center of two nut's sides 120 dregrees apart
    (1,030 × 697 (162 KB)) - 12:03, 26 August 2011
  • File:Prusamendel finished.jpg
    Lanthan's Prusa Mendel interpretation. Mechanical build completed August 2011
    (1,280 × 916 (545 KB)) - 06:01, 15 August 2011
  • File:Inverted belt idler.jpg
    A Nophead's idea published in his blog: http://hydraraptor.blogspot.com/2011/06/half-be
    (1,600 × 1,065 (214 KB)) - 04:01, 16 August 2011
  • File:Prusamendel mag x carriage.jpg
    ...netic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by [[User:Lanthan|Lanthan]], August 2011.
    (1,600 × 1,095 (423 KB)) - 04:41, 16 August 2011
  • File:Prusamendel mag x carriage2.jpg
    ...netic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by [[User:Lanthan|Lanthan]], August 2011.
    (1,600 × 1,065 (319 KB)) - 04:42, 16 August 2011
  • File:Woodsmoke labyrinth.ods
    The spreadsheet I use to check backlash using Woodsmoke's Lashmaze
    (15 KB) - 16:47, 28 August 2011
  • File:Gen7x4.JPG
    Bryanandaimee's 4 pcb's newly etched waiting for drilling and assembly for the contest
    (1,280 × 960 (335 KB)) - 16:05, 22 September 2011
  • File:ClearMP1.jpg
    The first of three photos of the clear unit's maiden print
    (4,608 × 3,072 (709 KB)) - 21:17, 25 October 2011
  • File:ClearMP2.jpg
    The second of three photos of the clear unit's maiden print
    (4,608 × 3,072 (697 KB)) - 21:18, 25 October 2011
  • File:ClearMP3.jpg
    The third of three photos of the clear unit's maiden print
    (4,608 × 3,072 (631 KB)) - 21:18, 25 October 2011
  • File:North90 hot-end overview.jpg
    North90's easy to build hot-end. Version 1.0
    (640 × 480 (31 KB)) - 19:23, 13 November 2011
  • File:North90 hot-end in-action.jpg
    North90's hot-end version 1.0 in action with a 0.4mm nozzle made out of a m6 bolt.
    (800 × 610 (92 KB)) - 22:23, 13 November 2011
  • File:OHM frame.JPG
    Basic frame assembly of Penn State's Open-hybrid Model.
    (1,200 × 1,600 (1.37 MB)) - 20:01, 8 December 2011

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)