RUG/Pennsylvania/State College/Printers/PSU Rainbow2
Operating Specifications
Operating Specifications | |||||||
---|---|---|---|---|---|---|---|
Name | Status | Design | Electronics | Firmware | Extruder | Temperature | Comments |
Rainbow2 | Under Construction | Ohm | RAMPS 1.4 | Marlin |
Photos
About this printer
This printer is designed to be an Open Hybrid Mendel, or OHM for short.
This printer was started during the Spring 2013 semester, however due to limited time they only finish the frame and x-axis.
The motherboard(RAMPS 1.4) of this Rainbow2 printer is finished.
|
Week Six
10/1/13
The Rainbow Printer Group is now the Blue Printer Group. There are an additional six members added to the group, to help finish printing, wiring and building the Rainbow 2 printer. A hot tip was completed this week for this printer.
Week Three
9/12/2013
For Fall 2013 the group working on this Rainbow 2 printer consists of: Quinn Carpenter, Abbie Letts and Scott Milander. Tonight we began by printing a spring for the printer in the color blue. The object is to print all the remaining pieces in various colors, to look like a rainbow, as the name states.
|