RepRapVids

<noautolink>RepRap</noautolink> Videos courtesy of YouTube

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/gsPAZfqvNUw"></param><embed src="http://www.youtube.com/v/gsPAZfqvNUw" type="application/x-shockwave-flash" width="425" height="350"></embed></object>	An attempt to print a corner bracket for the Darwin RepRap design fails when the workpiece detaches itself from the stage, and takes on a life of its own. 2.5 sec/frame time-lapse.
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/OSd0BgYuv10"></param><embed src="http://www.youtube.com/v/OSd0BgYuv10" type="application/x-shockwave-flash" width="425" height="350"></embed></object>	A time-lapse video of a hexagonal test object being printed on the Zaphod RepRap prototype. 2.5 sec/frame.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/mKGrz9QuBWs"> </param> <embed src="http://www.youtube.com/v/mKGrz9QuBWs" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	A new extruder design with the motor and drive offset, to allow a perfectly straight run down the drive thread for brittle or stiff extrude filaments.
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/xu9B3xZU2BU"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/xu9B3xZU2BU" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>	A prototype RepRap paste extruder, made from a fizzy drink bottle and a balloon... (Slightly surreally, the sound track consists of a musical biography on Radio 3; I was listening, and forgot to turn it off...)
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/Jftv9dIC_9U"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/Jftv9dIC_9U" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>	The first gears made, produced on the Zaphod RepRap prototype from 2.5mm polycaprolactone filament. A bit rough, but they mesh.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/x8EVwb53-2A"> </param> <embed src="http://www.youtube.com/v/x8EVwb53-2A" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	The "Da Witch" prototype extruding a test object onto a glass plate.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/GV4uOlAtlTI"> </param> <embed src="http://www.youtube.com/v/GV4uOlAtlTI" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	Attempt by Metalab in Vienna to make an X-axis prototype from something looking a lot like Meccano or Tinkertoy.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/QnlLsKOiGfE"> </param> <embed src="http://www.youtube.com/v/QnlLsKOiGfE" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	Video of the RepRap "Zaphod" prototype in operation at Paraflows '06 in Vienna, including the RepRap logo printed by the prototype.
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/n62mDx5v908"> </param> <embed src="http://www.youtube.com/v/n62mDx5v908" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	Johannes Grenzfurthner interviewing Vik Olliver about the RepRap on Austrian TV's Taugshow
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/TTcvToMReRA"> </param> <embed src="http://www.youtube.com/v/TTcvToMReRA" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>	The first extruded extruder, sans nozzle, slowly moving filament from one place to the other.

-- Main.AdrianBowyer - 03 Jan 2007