Hammerhead Nozzle
Hammerhead Nozzle
Release status: experimental
[[image:|center|190px]]
Description | Double heater hot-end that uses J-Head components and a special nozzle.
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Page under development. More information coming soon.
Contents
Introduction
Requests have been made for a hot-end that can extruder quickly with an orifice 1mm, in diameter, or greater. This nozzle uses all J-Head Mk V series compatible parts. Only the brass nozzle is different.
Parts List
Mk I
Summary: First Hammerhead hot-end.
Quantity | Part | Description | Part Number | Instructions | |
1 | Hammerhead Nozzle (v1.0) | Machined Brass Nozzle/Dual Heater Combination, Version 1 | |||
1 | Nozzle Holder (v5) | Machined PEEK Nozzle Holder, Version 5 | [1] | ||
1 | PTFE liner (v2) | 1/8" ID, 1/4" OD PTFE tubing, Version 2 | McMaster-Carr 5033K31 | [2] | |
1 | Heater Resistor | Axial, 5.6 ohm, 1%, 5W | UB5C-5.6-ND | ||
1 | Thermistor 5 | Semitec | 104GT-2 | ||
1 | Hollow-lock socket set screw | 5/16-24 hollow-lock socket set screw | McMaster-Carr 91301A150 | ||
1 | Flat Washer | 1/4" OD Flat Washer | McMaster-Carr 98032A436 |