PortaPrusa Build Manual
Revision as of 18:48, 16 May 2014 by Cubedparadox (talk | contribs)
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
PortaPrusa Documentation
About Build Manual
This is my personal build log, I will be posting regular updates as I make progress.
Still To Be Printed Parts
The Repo for the PortaPrusa contains all of the STLs you need in order to make the printer.
The following is a list of what still needs to be printed:
| Quantity | STL file | Comments | Picture |
|---|---|---|---|
| 0 | Z-Bottom-Large.stl | Fix mesh errors pls | 
|
| 1 | X-Big.stl | Holds Motor | 
|
| 1 | X-Small.stl | 
| |
| 0 | Extruder-Main-2.stl | Fix mesh errors pls | 
|
| 4 | M8-Mount.stl | Retaining block for m8 rod | 
|
| 1 | M8-Mount-Limit.stl | Contains mount for endstop | 
|
| 3 | M4-Mount.stl | Retaining block for m4 rod | 
|
| 1 | Y-Motor.stl | 
| |
| 1 | Bed-Clamp.stl | 
| |
| 1 | Box-Pivot.stl | 
| |
| 2 | Idle-Gear.stl | 
|
Done
These are Completed Prints
| Quantity | STL file | Comments | Picture |
|---|---|---|---|
| 2 | Z-Top.stl | Done! |  
|
| 0 | Z-Bottom-Small.stl | Fix mesh pls | 
|
| 1 | Extruder-Arm.stl | Done! | 
|
| 1 | Extruder-Clamp.stl | Done! | 
|
| 0 | Extruder-Main-2.stl | Fix mesh pls | 
|
| 1 | Extruder-Plug.stl | Done! | 
|
| 1 | M4-Mount.stl | One done, 3 to go | 
|
| 1 | Y-Idle.stl | Done! | 
|
| 1 | Bed-BeltMount.stl | Done! | 
|
| 1 | Bed-Clamp.stl | One done, 1 to go | 
|
| 2 | Bed-Slide.stl | Done! |  
|
| 2 | Box-Pivot.stl | One done, 1 to go | 
|
| 1 | Endstop-Mount.stl | Done! | 
|
| 2 | Drive-Gear.stl | Done! |  
|
Other Parts..
- Extruder -
- Controller -
