PortaPrusa Build Manual
Revision as of 18:39, 21 May 2014 by Cubedparadox (talk | contribs)
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
PortaPrusa Documentation
About Build Manual
This is my personal build log, I will be posting regular updates as I make progress.
Still To Be Printed Parts
There are a few parts that I am considering making, such as pla bushings and a bar to lock the box open, but all existing files have been printed :)
Done
These are Completed Prints
Laser Cut Parts
These Parts need to be laser cut.
- The Wooden box is made from '1/4 in' (.2 in) or 5mm sanded ply.
- You will need a 2ft x 3ft board to do it all. (usually sold in 4 ft sections)
- There is also a Piece made from acrylic, but I haven't designed it yet, so that will have to be put on hold.
Other Parts..
Here are some of the electronics I'm using.
- Extruder - I'm not sure what this extruder is called, will try to update when I figure that out.
- Controller - This printrboard was made by geeetech, I got it on sale for a great price! :)
- Motors - (still need to take a picture) I'm using 5 compact Nema 17 stepper motors. Most Nema17s are pretty similar, but there are some differences, mainly in the wires.