Nozzle manufacturing
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
There has to be this really tiny hole in the center of the nozzle. Requires high precision machine to make one, right?
Wrong. It can be really dead simple.
Dremel & Bare Drill bit
Here's a video made by Alan Long, showing how to do this drill by hand. As the drill diameter is very small, you don't even need a chuck for it. Watch yourself:
<videoflash type="youtube">am4oMek0zBU</videoflash> |
Hand Drill & Printed Assembly
This video shows a method using a hand drill and an assembly made out of printed parts (minure 14:00 to 14:20). It also shows how to taper the nut (minute 8:00 to 8:20). Tapering the nut is done by many people, but also many consider it to be not neccessary.
<videoflash type="youtube">kYImCO_SDms</videoflash> |