RepRap Samuel
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Release status: working
Description | Silpstream's Augmented Mendel a.k.a Samuel
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
RepRap Samuel is designed to reuse the vitamins and some parts from the Prusa Mendel i2 or the Mendel. As such, an owner of either of the RepRaps should be able to print the new parts on their existing 3D printer to rebuild it into Samuel. It's design objectives are:
- Reuse vitamins and parts from RepRap Mendel
- Increase build volume in the Z-axis
- Improve X-motion stability
- Upgrade X-axis to newer vertical designs
CREDITS
The following components were used in this project:
- Unbreakable Bar Clamp by mikepcw - [1]
- Prusa Leveling Vertex by Ahasuerus - [2]
- Bed levelling thumb wheel by Wired1 - [3]
- 40mm Supportless, Directed Cooling Fan Duct for MendelMax & Prusa by AeroMonkeyDork - [4]
- The frame stabiliser was also from Thingiverse, but the thing seems to have been removed.
Specification
- Size: 420x420x440mm
- Build Volume: 196m x 196 mm x 200mm
- 5 x NEMA 17 motors
- Electronics: Should work with most RepRap electronics
- Structural materials: M8 rods, ABS/PLA
Parts
M8 Rods
Quantity | Part | Comment | 6 | 370mm M8 threaded rod | 4 | 294mm M8 threaded rod | 3 | 440mm M8 threaded rod | 2 | 210mm M8 threaded rod | 2 | 350mm 8mm smooth rod | 2 | 405mm 8mm smooth rod | 2 | 420mm 8mm smooth rod |
---|
Printed
You can find all files on reprap_samuel@GitHub.
Build
Detailed pictures to show how the parts go together.