Alubot

From RepRap
Jump to: navigation, search
Crystal Clear action run.png
Alubot

Release status: concept

Alubot.png
Description
Alubot is one of the easiest to build Reprap 3D printer, and uses Aluminum t-slot as frame.
License
GPL
Author
Contributors
Based-on
Categories
none
CAD Models
none
External Link
none

ALUBOT

Screenshot of solidworks assembly of the Alubot

Info

Alubot aims at beeing one of the easiest 3D printers to build at a low cost, and uses the concept of Reprap to do so. Alubot consist of 7 equally long t-slot aluminium extrusions, 10 90degrees brackets, 4 smoothrods, 2 threaded rods, 5 motors and more. Alubot is easy to scale, by adjusting the length of the aluminium extrusions, smooth rods and the threaded rods. but i would still advice to build the printer for a printarea of 20x20cm for a first time builder.


Parts

Updates shortly

RP Parts

The following is a list of what needs to be printed:

Quantity STL file Comments Picture
X-AXIS
1 X-Endstop_Motor.stl
X-endstop motor.png
1 X-Endstop_bearing.stl
Y-AXIS
1 Y-BearingHolder.stl
1 Y-Motor_holder.stl
4 Y-LM8UU_Holder.stl
4 Y-8mm-Smootrod_Holder.stl
Z-AXIS
2 Z-motor_holder.stl
OTHER
10 Bracket_90degree  These can also be bought in metal

Vitamins

Updates shortly

Electronics

Updates shortly