Basic Starter Working Configurations

You might also want to look at Category:Working Configuration. Perhaps some or all of that page should be merged into this page. (Discuss)

So you have built your 3D printer... Now there are very many configurations due to the diversity of the RepRap Project.

Here is a list of some basic Known to be working configurations collect from RepRappers using their 3D printers.

So make this as useful as possible we need to define a standard method to define the basic configuration.

Each configuration has a Electronic hardware description the physical definition of your 3D printer is not coverd by this description.

____________________________________________________________________________________

RepSnapper Basic Windows Configuration Any RepRap / RepStrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________

Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________

RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________

RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________