Betzbot

(currently unnamed)

Release status: experimental

Description	Grue Labs : Gada Prize Entry
License	GPL
Author	User:Luke Chilson, Alex English
Contributors
Based-on	[[]]
Categories	Gada Prize
CAD Models
External Link

Design Criteria

Primary Design Criteria

1. Print with three three different materials*
2. Print electrically conductive material
3. Print Electronic Circuit Boards*
4. Print Bed usable through 20 print cycles*
5. Total cost, not including Print Bed, not exceeding $200*
6. Not less than 90% of the volume of the printer must be printed*
7. Build volume of at least 300x300x100mm
8. Full part set printable in under 10 days unassisted save cleaning one head jam
9. Print untethered from PC
10. Consume no more than 60 watts*

- *Clarification Needed