DRV8825

Description

The DRV8825 is a 1/32 microstepping stepper motor driver devolped by Texas Instruments.

The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can drive a bipolar stepper motor or two DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as full H-bridges to drive the motor windings. The DRV8825 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C).

A simple step/direction interface allows easy interfacing to controller circuits. Pins allow configuration of the motor in full-step up to 1/32-step modes. Decay mode is programmable. Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout and overtemperature. The DRV8825 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).

Features

• PWM Microstepping Motor Driver
• Built-In Microstepping Indexer
• Five-Bit Winding Current Control Allows
• Up to 32 Current Levels
• Low MOSFET On-Resistance
• 2.5-A Maximum Drive Current at 24 V, 25°C
• Built-In 3.3-V Reference Output
• 8.2-V to 45-V Operating Supply Voltage Range
• Thermally Enhanced Surface Mount Package

Applications

• Automatic Teller Machines
• Money Handling Machines
• Video Security Cameras
• Printers
• Scanners
• Office Automation Machines
• Gaming Machines
• Factory Automation
• Robotics

Datasheet

[1]