Delta Build Workshop

From RepRap
Revision as of 11:39, 29 January 2019 by Hmreish (talk | contribs) (Created page with "{{MOST}} {{MOST-RepRap}} image:deltabuild.jpg =Schedule of Events= ==At least two weeks prior to workshop== * Distribute [http://3d4edu.com/WorkshopPreparation.pdf int...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Sunhusky.png By Michigan Tech's Open Sustainability Technology Lab.

Wanted: Students to make a distributed future with solar-powered open-source RepRap 3-D printing and recyclebot recycling.
Contact Dr. Joshua Pearce or Apply here

MOST on RepRap: Projects and Publications], Methods, Lit. reviews
Twitter updates @ProfPearce

OSL.jpg


This page is part of an international project hosted by MOST to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.

Research: Open source 3-D printing of OSAT RecycleBot LCA of home recyclingGreen Distributed Recycling Ethical Filament LCA of distributed manufacturingRepRap LCA Energy and CO2 Solar-powered RepRapssolar powered recyclebot Feasibility hub Mechanical testing Lessons learnedMOST RepRap Build


Make me: Want to build a MOST RepRap? - Start here! • Delta Build Overview:MOSTAthena Build OverviewMOST metal 3-D printer Humanitarian Crisis Response 3-D Printer



Deltabuild.jpg

Schedule of Events

At least two weeks prior to workshop

Evening Prior

(Two hour duration) All attendees must bring their laptops to this introduction.

  • Welcome and introductions
  • Facilitators will check that all of the software outlined here is installed and working
  • Facilitators will assure assembly wiki and videos are accessible by each attendee
  • Attendees will assemble tools

Day One

(Expect eight hour minimum duration)

  • 8:00 AM - Mark's introduction to 3-D printers in the classroom
  • 8:30 AM - Introduction to workshop format and assembly
  • 9:00 AM - Start assembly
  • 12:00 PM - Break for lunch away from assembly area
  • 12:30 PM - Resume assembly
  • Teams who complete assembly early should help teams that are not complete
  • Teams leave only upon demonstrating all mechanical assembly of the first printer is complete

Day Two

(Expect eight hour minimum duration)

  • 8:00 AM - Start assembly
  • 12:00 PM - Break for lunch away from assembly area
  • 12:15 PM - First presentation
  • 12:30 PM - Resume assembly
  • 3:00 PM - Break for second presentation - all assembly come to a stop for presentation
  • 3:15 PM - Resume assembly
  • Teams who complete assembly early should help teams that are not complete
  • Teams leave only upon demonstrating all mechanical assembly of the second printer is complete
  • If all teams complete mechanical assembly early, upload firmware

Day Three

(Expect eight hour minimum duration)

  • 8:00 AM - Upload firmware
  • 10:00 AM - Initial power up of printer, start calibration
  • 12:00 PM - Break for lunch away from assembly area
  • 12:15 PM - Third presentation
  • 12:30 PM - Introduction to online model repositories; how to download and print models
  • 2:00 PM - Introduction to OpenSCAD
  • 2:30 PM - Finalize calibration, build printing skills

Day Four

(Expect eight hour minimum duration)

  • Individuals download a model from the internet and print it
  • Individuals design, render and print an OpenSCAD model of their own
  • Build printing skills

Navigation

Usage

Use the following code to implement this template:

{{MOST Delta Nav}}

</noinclude>

Tandem Build MOST Delta Navigation
Green indicate workshop tasks
Printer Primer
Overview
Soldering and tinning
Assembling hot end]
Drilling Pilot Holes
Person 1 Person 2
Tie Rods and Pulleys Epoxying Magnets
Motor End Assembly Idler End Assembly
Extruder Drive Mount Bases
End Effector Frame
Verticals
Wiring
Firmware
Software
Finishing
Printing Basics