File:Cnc extruder fritz.png

From RepRap
Revision as of 05:43, 15 May 2013 by Vikolliver (talk | contribs) (A fritzing circuit showing how to wire up a CNC Extruder to a couple of switches. The switches would normally be replaced by direct inputs, or possibly relay contacts, but are handy for manual testing.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(1,140 × 891 pixels, file size: 75 KB, MIME type: image/png)

A fritzing circuit showing how to wire up a CNC Extruder to a couple of switches. The switches would normally be replaced by direct inputs, or possibly relay contacts, but are handy for manual testing.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:23, 15 May 2013Thumbnail for version as of 22:23, 15 May 20131,140 × 891 (75 KB)Vikolliver (talk | contribs)Correcting +12V connection to stepper driver and heater.
05:43, 15 May 2013Thumbnail for version as of 05:43, 15 May 20131,140 × 903 (74 KB)Vikolliver (talk | contribs)A fritzing circuit showing how to wire up a CNC Extruder to a couple of switches. The switches would normally be replaced by direct inputs, or possibly relay contacts, but are handy for manual testing.
  • You cannot overwrite this file.

The following page links to this file:

Metadata