File:Duet ADC calibration.jpg

From RepRap
Revision as of 18:43, 3 May 2016 by PRZ (talk | contribs) (Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file ‎(717 × 706 pixels, file size: 111 KB, MIME type: image/jpeg)

Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:43, 3 May 2016Thumbnail for version as of 18:43, 3 May 2016717 × 706 (111 KB)PRZ (talk | contribs)Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Image titleDuet 0.8.5 Use resistor for ADC calibration
AuthorPierre ROUZEAU
Copyright holder(c) Pierre ROUZEAU CC BY-SA and GFDL 1.2
Special instructionsCC BY-SA GFDL 1.2
Short titleDuet 0.8.5 Use resistor for ADC calibration
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Duet_ADC_calibration.jpg&oldid=174696"