File:Lasercut gear non centered hex hole.png

From RepRap
Revision as of 06:01, 22 May 2011 by DeuxVis (talk | contribs) (The big extruder lasercut gear as provided by Techzone in their Huxley kit. Note the little "washer" with an hex hole was glued a bit aside regarding the gear round center hole.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(1,024 × 768 pixels, file size: 1.12 MB, MIME type: image/png)

The big extruder lasercut gear as provided by Techzone in their Huxley kit. Note the little "washer" with an hex hole was glued a bit aside regarding the gear round center hole.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:01, 22 May 2011Thumbnail for version as of 06:01, 22 May 20111,024 × 768 (1.12 MB)DeuxVis (talk | contribs)The big extruder lasercut gear as provided by Techzone in their Huxley kit. Note the little "washer" with an hex hole was glued a bit aside regarding the gear round center hole.
  • You cannot overwrite this file.

The following page links to this file:

Metadata