File:WastePlasticExtruder prototype.jpg

From RepRap
Revision as of 21:56, 16 October 2011 by J.M.Pearce (talk | contribs) (From http://www.appropedia.org/File:WastePlasticExtruder_prototype.jpg cc-by-sa)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file ‎(2,448 × 3,264 pixels, file size: 1.66 MB, MIME type: image/jpeg)

From http://www.appropedia.org/File:WastePlasticExtruder_prototype.jpg cc-by-sa

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:56, 16 October 2011Thumbnail for version as of 21:56, 16 October 20112,448 × 3,264 (1.66 MB)J.M.Pearce (talk | contribs)From http://www.appropedia.org/File:WastePlasticExtruder_prototype.jpg cc-by-sa
  • You cannot overwrite this file.

The following 2 pages link to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon PowerShot SD1300 IS
Exposure time1/60 sec (0.016666666666667)
F Numberf/3.2
ISO speed rating250
Date and time of data generation18:53, 4 April 2011
Lens focal length6.008 mm
OrientationRotated 90° CCW
Horizontal resolution180 dpi
Vertical resolution180 dpi
File change date and time18:53, 4 April 2011
Y and C positioningCo-sited
Exif version2.21
Date and time of digitizing18:53, 4 April 2011
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode3
APEX shutter speed5.90625
APEX aperture3.34375
APEX exposure bias0
Maximum land aperture3.34375 APEX (f/3.19)
Metering modePattern
FlashFlash fired, auto mode, red-eye reduction mode
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:WastePlasticExtruder_prototype.jpg&oldid=43442"