Full Rod Cut List
Revision as of 20:51, 14 February 2012 by StephenThor (talk | contribs) (Created page with 'Each open hybrid mendel Rep Rap will need a full set of threaded and smooth rods for the building process. {| class="wikitable sortable" border="1" |- ! scope="col" | R…')
Each open hybrid mendel Rep Rap will need a full set of threaded and smooth rods for the building process.
| Rod | Part Name | Quantity | Length (in.) | Rod Type |
|---|---|---|---|---|
| A | Y-Axis rail | 2 | 18 | smooth |
| B | Z-Axis rail | 2 | 13 | smooth |
| C | Triangular frame | 6 | 14.5 | threaded |
| D | Short cross-bars | 4 | 11.5 | threaded |
| E | Long cross-bars | 3 | 17.5 | threaded |
| F | Z-drive rods | 2 | 10 | threaded |
| G | Y-plate support | 1 | 4.5 | threaded |
| H | Spool base | 2 | 4 | threaded |
| J | Spool arm | 2 | 9 | threaded |
A recommended cutting plan is shown below. This plan uses 1 meter stock rods from a hardware store.
